Hi? - Computers & Internet

The spring-loaded detent in the switch itself sounds like it went.

You might buy a new switch and replace.

This is right out of the manual. Hope it is what you are looking for. Cobra. :-) Lamp, Rear Hi-Mount Removal

1. Slide rear hi-mount lamp cover (13A656) away from back window glass (42006) and remove rear hi-mount lamp cover.
   

1. Remove one screw retaining rear hi-mount lamp (13A613).
   

1. Lift edge of rear hi-mount lamp and pull away from back window glass.
   

Installation

1. Follow removal procedure in reverse order.
   

1. Slide rear hi-mount lamp cover onto rear hi-mount lamp to engage retainers.
   
   
   Hi-Mount Rear Lamp
   
   
   
   
   
   Item Part Number Description 1 921 Bulb 2 56929-S2 Screw 3 13A613 Rear Hi-Mount Lamp 4 13A656 Rear Hi-Mount Lamp Cover 5 15A442 Rear Hi-Mount Lamp Wiring

Hi, unless the VCR/dvd recorder is hi def then you won't be able to.

Hdmi connection is hi-def, I think you can have a hi-def signal through composite, but it's your recorder thats the problem, it cannot read the number of line a hi-def signal has.

I have just found this.
http://www.brighthub.com/electronics/home-theater/articles/48499.aspx

I hope this helps.

Regards - Anthony

hi hi hi hi hi hi hi hi hi hi hi hi

hi i lost my windows xp product key.plz help me

I had this problem also, disconnect the battery a leave it for a while, this reset it,
only draw back somtimes it will reset idle also and vehicle will stall, to fix this just let it sit idling
for a bit and it will relearn the settings

It could possibly be a bad motor mount.

hi

In order to shoot "HI" TIFF images first set the Image Size option to either "5M 2592x1944" or "3:2 2592x1728." Next, choose "HI" as the Image Quality option. "HI" is only available in one of the manual exposure modes (P, S, A or M) and is not available in the "Auto" shooting mode. If "HI" is selected and the camera is switched to "Auto" the Image Quality will automatically switch to "FINE" mode and a JPEG image will be recorded. Additionally, "HI" is only available in "S" Single frame Continuous shooting.