InFocus LP210 Multimedia Projector Logo

Related Topics:

Question about InFocus LP210 Multimedia Projector

1 Answer

Infocus LP240 projector will not power up

The Infocus LP240 will not power up. WE had a power surge and that may have killed something. I have two of them with the same condition. In desparation, I switched lamps on each other and tried to power up without success. Can someone please help with a diagnostics guide and possible repair manual to figure oiut which component has blown and how to change it? Much regards, Lalit.

Posted by Lalit Chabria on

  • 1 more comment 
  • Anonymous Apr 22, 2008

    Power light blinks red but no fan noise or light from lamp...total silence.

  • Lyle Nov 03, 2008

    I have the same problem...please help! [email protected]

  • raveon1 May 11, 2010

    hi i have got an INFOCUS LP240 and its suddenly stopped working while i
    was watching a film it will turn on and light up as normal but afta 30
    secs or so it turns of and the L.E.D next to power button flashes red
    and green wat do i do PLEASE HELP ME!!!!!!!!!!!!!

×

Ad

1 Answer

jasbo

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,239 Answers

If you don't even get an led, it's the power supply. it may just be the fuse on it. take the top off and see if the fuse is blown. but make sure to replace it with the exact size and type.

Posted on Aug 03, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Infocus LP240 fan shuts off

If you want you can check the voltage at the power conector on de main board. but the problem are the fans, replace the fans, and check the routing cable, its very important.
0helpful
2answers

Lp240 projector

power supply is bad and needs to be replaced. unfortunately, there are no parts for this model. infocus no longer sells them, and they were made by another company that no longer makes power supplies. therefore, no schematics either. sorry.
0helpful
1answer

Projector LP240 has no power

replace the power supply. the caps go bad on it after a while. you could get the part from and infocus service center and do it yourself or send it in to them and let them repair it. either way, try av solutions in ny. they're really good. www.avsolutionsny.com
4helpful
1answer

InFocus LP240 Projector won't turn on.

there is a fuse on the power supply next to the plug (on the inside), but this model of projector has power supply issues. the biggest being that infocus no longer has parts, schematics, or component cross references for the lp240. the circuit boards were made by another company that made had their own components and now no longer makes circuit boards (they make fans and bearings), and they have no schematics either. so, i'm sorry to say that the machine is doa. there are no replacement parts available and almost no way to fix the old ones.
0helpful
2answers

Sound from an InFocus LP240 Projector

it's just a line level signal with a 1/8" stereo phono jack. there is an amp and speakers in the projector, but they're meant for presentations, so there's not much to them. but there is no audio out coming from the projector, so you'd need a separate amp and speakers coming from the ps2.
0helpful
1answer

Infocus LP240 Projector

The bulb won't do that. What you're describing sounds like a light tunnel failure.
Not finding what you are looking for?

825 views

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76835 Answers

Jerry Kramer
Jerry Kramer

Level 3 Expert

3925 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...