Hello, My Hitachi 43UWX10B will not power on properly. The power light will flash and I hear a clicking noise. I openned up the back and saw a green LED flashing. The id on the circuit board for this LED is DP25. Can anyone help me with this? Thanks, Scott
Located in the power supply section of the unit. There is a pico fuse (soldered in fuse) that opens up and there is no high voltage. The second click that you hear when the set is turned on. This can be diagnosed With set unplugged, with an ohm meter with a simple continuity test. I think the pico fuse is 4 amps , I am not absolutely sure. I have seen this problem in that unit previously. There is also a convergence problem that occurs with that set. Scrivitron.
Posted on Jun 29, 2007
Jun 06, 2011 | Hitachi 43UWX10B 43" Rear Projection...
Jun 24, 2010 | Hitachi 43UWX10B 43" Rear Projection...
May 12, 2010 | Hitachi 43UWX10B 43" Rear Projection...
Jul 26, 2009 | Hitachi 43FDX01B TV
Jun 16, 2009 | Hitachi 43UWX10B 43" Rear Projection...
Jul 31, 2008 | Hitachi 43UWX10B 43" Rear Projection...
Dec 31, 2007 | Hitachi 43UWX10B 43" Rear Projection...
Nov 04, 2007 | Hitachi 43UWX10B 43" Rear Projection...
Sep 30, 2007 | Hitachi 43UWX10B 43" Rear Projection...
The "green light flashing to the chirping" circuit may be defective.
Not a basic diagnosis--service literature and/or knowledge of each green light circuit will be needed.Possible shop repair.
Oct 05, 2006 | Hitachi 43UWX10B 43" Rear Projection...
100 views
Usually answered in minutes!
×