Question about Tecnik TKL9290 Front Load Washer / Dryer

Tecnik TKL 9290 / Washer Dryer

My machine is not spinning or draining. Hope someone can help quickly as I have a pile of washing that needs to be done! Thank you so much!

1 more comment
Joyce Murray Jun 16, 2007

THank you for your help! Tried all this and still not draining or spinning! Could it be the pump??? Thanks so much for your help!
ted38 May 15, 2008

My Tecnik Washer Dryer (TKL 9290) is not draining or spinning. It continues to the end of the cyle but in place of the drain and spin parts there is a low buzzing noise.
Anonymous May 20, 2008

I have the same problem. It will not drain or spin at all! Any ideas????

2 Answers

andy_m_neill

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.
Contributor
1 Answer

I don't know the cause, but our Tecnik does the same thing. So, we switch it 'off' for 30 seconds using the main dial, then switch it to 'spin' or 'rinse' (wherever it got stuck). It starts back up again.

Posted on Nov 18, 2012

douglas smith

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
1,462 Answers

No drain then no spin check the filter and also if there is a foreign object jamming the drain pump impellor

Posted on Jun 16, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Error code auto load adjusting and then does not spin

Sound like the pump is clogged here a link
http://laundry.manualsonline.com/manuals/mfg/bosch/axxis+_wfr_2460.html
page 37

Mar 07, 2014 | Bosch Axxis+ WFR 2460 Front Load Washer

2 Answers

After washing it makes loud noise & won't spin or drain

You shoul inspekt water outlet on the bottom of the drum. There is mabye something inthere.

Dec 02, 2017 | Washing Machines

1 Answer

We have a load in....it is full of water....it wont drain and spin...the cancel button doesnt work and door wont open....I checked for kinks in drain hose...none. I took off top panel and front lower...

Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin

If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning

heatman101

Nov 12, 2010 | Kenmore Washing Machines

1 Answer

My whirlpool duet washing machine will not spin quickly to drain out the excess water in the clothes. I noticed a set of lights are out on water temp (superhot and warm) and the low spin speed light. Any...

It sounds like that you may have some non-funtioning circuits in your control panel. May need to hire someone who is well versed in electronics to test some of the circuits.

Mar 12, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fisher & Paykel Smart Drive 7.5 washing machine.

Unplug the machine have someone tilt the machine back and look under the machine for a little fan on a motor give it a turn to see if it spins it might just be sticky or it may need replacing.

Jan 07, 2010 | Fisher Paykel Eco IWL16

1 Answer

KitchenAid Washing Machine will not drain. Did a large load prior to the one that was just done. The washer will not drain, started fine went through all the cycles just fine. Drained and rinsed once, then...

I would check the drain line for kinks and obstructions and then the pump. Remove the hoses from the pump and check for anything clogging it (like the occasional stray piece of clothing) and check the pump impeller. Make sure there are no broken or missing blades and that the impeller will spin freely. If any blades are missing/broken or if you can't get the impeller to spin freely, the pump is defective. Hopefully it's just a clogged drain line, pump, or jammed impeller. Sorry for your trouble and I hope this helped. Best wishes.

Sep 14, 2009 | Washing Machines

2 Answers

Goes to spin cycle, then just hums

I believe your washer has a drive coupling. This coupling has two rigid halves with a rubber spider between them, with time the things break... I can speak from experience. Unplug your washer and with the help of someone lean it back to get a look at the coupling (you might even notice a small pile of the black rubber from the coupling) If this is it you can fix it without much issue or cost @ $20 or so.

Hope this helps,
Tom

Aug 21, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Machine will not agitate for wash or rinse cylces

that could be your problem or your drain pump maybe full... try spin and drain see if it will drain

Sep 08, 2008 | GE Energy Star WCVH6260F Front Load Washer

1 Answer

Hotpoint Aquarius WD420 washing machine won't spin and drain

same thing happened to me called engineer over flow pipe was blocked hope this helps anyone with this problem

Mar 04, 2008 | Washing Machines

2 Answers

Hotpoint Aquarius WM 62

Hi, Does the drum turn during the wash cycle? When it comes to the spin cycle does it go through to the end without the drum turning? It sounds like it could be the motor needs new carbon brushes. Regards, Tom.

Apr 03, 2007 | Hotpoint Aquarius WD63 Front Load...