Philips DVD621AT DVD Player Logo

Question about Philips DVD621AT DVD Player

4 Answers

Lost owner's manual

I have recently purchased my son a Fisher-Price InteracTV gaming system and it did not come with a manual. When I looked the manual up online to program the gaming controler it requires you to enter from the owners manual of the DVD player, and 4 digit manufacturer's code for my DVD player. And I have seemed to have misplaced my owner's manual and I can't get it setup without it. Can you help?

Posted by Rebecca Meyer on

  • ashabaya Nov 30, 2008

    I lost the manual for my interactv DVD system. Need DVD codes.

×

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers
Ad

Anonymous

Cant program remote for the interactv to the dvd player

Posted on Dec 22, 2007

Ad

Anonymous

The codes are available onkline at the fisher-price site in a .pdf. However we have had this game for a whiela nd it worked well on our Mitsubishi DVD but WILL NOT work on our new Philips DVD recorder. GOOD LUCK

Posted on Aug 10, 2007

Henry Thomas

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,074 Answers

Check this site www.service-manual.net or electromaniacs.com you will be able to i hope to get a manual for your set. on the first mention website the price of a manual is about $10.99 us.the other site you can download for free.good luck my friend

Posted on Jun 23, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Looking for a manual for the fisher price interactv learning system need to now how it all works and how to hook it up with the dvd player

Contact Fisher Price through their customer service line. Either that or they may have a manual online that you can download. They are very friendly and and helpful
1helpful
1answer

Help

go on line and look up the manual.
0helpful
1answer

Interactv

i presume there are av cables, so i'd say plug them in and turn the tv to av mode(somewhere on your remote control you should see and a.v button) press it mutipule times until you get to the right channel and the device should display through the tv
5helpful
4answers
0helpful
1answer

Mattel Fisher Price InteracTV consol game

There is a set up Card and programming Card that you need to use in order to get the game working you don't need any code. If it doen't work you can call to Mattel-Fisher Price they have a very good customer service line. Let me know if you need more help. Good loock!!
103helpful
19answers

Need manual or help for Fisher Price INTERACTV controller set-up

You can get them at the fisherprice site. Heres is there faq and help section which can be useful to you and your husband.

http://www.fisher-price.com/us/interactv/faq.asp
Not finding what you are looking for?

Open Questions:

0answers

Whirlpool Side by Side American style Fridge Freezer too hot and too cold! I have model S20D FSS10-A/D Service number 8586 161 15000 Side By side FF - and after replacing many components on the rear board 13 years ago it has been running well. However.... with a new fault I am hoping that the symptoms may allow someone to point me in the right direction. Not having a circuit diagram has been a hindrance. Over last few years the front panel inside in the fridge in my model has been developing a display fault - it started with the LED display winking out briefly about twice a second. The mark/space of time for the 'winking out' changed slowly to 50% on 50% off twice a second to eventually become just flashing on briefly twice a second and finally off all the time. However, the default settings/functioning of the FF has been working fine so didn't need to use the panel. However, can't read any fault codes that might be there I don't think that the buttons are doing anything on the panel. It has 15v supply but I don't know what supply voltage from the rear PCB should be. Then... A few weeks ago the house RCD tripped once and the fridge bulb had blown ********* stain on bulb interior and Relay RL3 was chattering randomly - I took the board out and noticed a fried circuit track where it looped thinly either side of component hole that was unused. I soldered in a bridge over the gap. Restarted the FF. From then the freezer cools to -32c and warms up to -2c and down to -32 etc.. The fridge varies in temp but does go as low as 0c and high as +9c. Alongside this, when the compressor is not running we can heard a ticking noise and identified that the compressor fan was turning slowly about ?100 rpm There's no ice build up, the freezer to fridge air louvres are opening and closing when you switch the FF on, and do seem to open and close at different times. The evapourator fan seems fine as does the compressor fan, the bottom of the fridge is dust free and the rear panels are all on to allow proper cooling of the condensor motor. I pulled the board again, checked all the capacitors I have a slightly different board to many and all the capacitors I had used from one brand have failed again. I took all the caps out and measured them. C6, C16 should have been 0.68uF and were in the order of a few nF C14, 26, 27,28 should have been 0.1uF and were 0,.6nF, 2nF, 10nF and 38nF respectively. All other film and electrolytic capacitors were within tolerance. I replaced all the faulty caps thinking that I had found the display problem because you had told me in the past that C6 and C16 relate to the front panel and the cooling issues and fan issues but NONE had been cured :- I checked the continuity to the front panel of all connectiions and they're fine. Also checked the 2 electrolytics on the front board. So I am at a bit of a loss. I have checked the zener diodes in situ and all have about 6v forward voltage drop I cannot find a replacement board due to different connectors on my unit - so unless I can fix we will have to fork out for a new FF :-

See all Philips DVD621AT DVD Player Questions

468 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6557 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...