first you have power supply problems + also may be convergence ic's depending . on the tech coulbe in parts around 100.00 plus labor 2hrs job another 180.00. if you want to go deeper with the diagnostic you need to have a multimeter and follow some intructions let me know thanksfirst you have power supply problems + also may be convergence ic's depending . on the tech coulbe in parts around 100.00 plus labor 2hrs
job another 180.00. if you want to go deeper with the diagnostic you need to have a multimeter and follow some intructions
let me know
thanks
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How did you try recaibrating? I just fixed my son's Leapster 2 a few minutes ago. I read a couple different recalibration instructions and the one that works for the Leapster 2 is:
1-Hold down the (?) Hint button while turning on the system.
2-Keep holding it down until the Leapster menu shows up
3-Let it go and press the A button
4-Touch each crosshairs x with the pen tip
5-When it goes back to the menu screen, restart the unit
Unplug your receiver for two minutes. When the first screen pops up I think it says acquiring satellite info do the following.
With the remote press menu then go to settings then setup then reset
and press restart everything . Just remember to reset your times and settings on the dvr. It may not work right away, just keep trying, including unplugging the infernal machine!
your console might be over heated . if you continusly try to play it, stop leave it alone for around 10 minutes. get a soda watch some tv and make sure that consule is completly disconnect from the wall.
Check to see if something was spilled on the screen of this set
or using too much cleaning solution.
As it will run down on to the tac switches and create problems with the cpu.
Thanks guy
completely turns off. no sound no picture nothing.
×