104AR recever no sound

It would go to audio out ports.

Kenwood Customer Phone Number Shortest Wait Best Support

Phone Number

800-536-9663

Average Wait: 1 mins - 24 hours, 7 days

hello
could you solve your problem? if so, please tell me how, because I am in the same trouble

That would depend a lot on the subwoofer, which you did not name. I'll assume it's a self-powered model of some sort.

A sngle RCA cable from the Subwoofer Preout wll get you started. The other end is unknown.

You'll aslo have to set up the recever to know it has a subwoofer and other parameters. Find the manual at retrevo.com.

in the words of my teacher jb wilson 57 yrs repairing electronics long now passed. "anything can be fixed its just how much you want to pay" yes it can be fixed but of all things water is electronics worst enemy. i would suggest you get a good quote. from a local repair shop but yes being water i would not like your chances.

best of luck ..

From what I know all receivers need an antenna, there should be a connection in the back for one. Sometimes you can just use a piece of wire if you live in a large city.

The unit has only 2 channels of output thus, cannot provide surround format. Depending on your sound needs, you will have to shop around for a good 5.1 or 7.1 surround unit

yes

I think you are right. What cause this problem?

theres a fuse that blew.. ive had to replace mine three or four times. just open it up and the fuse will be somewhere close to the volume knob