Installed Netgear but can't send e-mail

Netgear WGT624 V3 Wireless Router Problems by BigG2 - January 16, 2007 1:17 AM PST

Hi Guys/Gals,

My wireless connection is not working and i cannot log on to it, I have connected a Netgear WGT624 V3 Wireless Router to my Motorola SurfBoard SB5101E Modem which is connected to Telewest Cable Broadband (internet works fine if i access directly through the modem), on the router the power light is lit and also the internet light flashes rapidly but the wireless light comes on for a couple of
seconds and then goes out - i think this is the problem? I have tried logging on to the router to check the wireless settings but cannot access it, i have also tried connecting directly via LAN but cannot get this to work either although i am not sure if i have connected it correctly?

Any ideas/comments/advice is very much appreciated!!

Thanks in advance,

you can access the router's wireless settins so that you can check the wireless password or the network key for you to connect your iphone to the internet

If you have lost the password to access the router page then you have to reset the router

Ensure that you have all the details regarding your internet connection before resetting the router

If you reset the router you can run the smart setup wizard and get connected by entering correct information in all the pages of the wizard

If you are looking for the wireless password:
--------------------------------------------------------------
Access your router page ( Open Internet Explorer --> Type 192.168.1.1 and enter it--> Login name(default)-admin, Password(default)-password) --> GO to wireless settings,under Wireless settings you will find the wireless password.

Try this link. It contains the common causes of limited connection and some solutions that you can try:

http://www.fixya.com/support/t1662136-limited_access_internet

Plug an ethernet cable into the wan port of the router from your virgin modem... then plug ethernet cable from computer into a port on the router....that should solve your problem.

Hi,

You can download a manual from the Netgear website.

You'll need the full model and version number of your router. If you're not sure of this, take a look at the base of the router, where there should be a label with this information (for example, WGT624v4, or WGT624v2.)

Then visit this page and click the link to the Support Page for your model number:

http://kbserver.netgear.com/products/WGT624.asp

Links to the downloadable installation guides/manuals are usually on the left-hand side. Good luck.

http://kbserver.netgear.com/products/WGT624.asp

then set up the network

http://lifehacker.com/software/wifi/geek-to-live-set-up-a-home-wireless-network-162754.php

Make sure that your computer is getting a valid IP address from the router. If your wireless network is secured, you might as well consider checking the wireless settings.

have a look at this site it will help you http://www.lycoming.edu/acad/Netgear%20Wireless%20Router%20Setup.htm

Have you looked at these posted solutions? http://www.fixya.com/support/t133938-wireless_connection