USB CABLE FOR MFC 1770

I can't print nothing from my PC or trough network, but still I can Scan, Fax, etc. I'm using Windows 7 Home Basic, I already installed the driver ( "Connection via USB Cable" ) and I have plenty enough ink ... I checked the Settings, Test Page is OK, but nothing else want to be pinted. I had a problem with my MFC 5890 in the very begining ( nearly 2 weeks ago ) so I had to unplug and than plug in the USB Cable and in this situation the printing of my "pending documents" was successful, but from few days ago there is no such a thing that could make it print. Please help

See if you can get it to install drivers useing USB cable,

Make sure your firewall is not blocking it<--turn firewall off and try..

my mfc210c will not obey command to print multiple copies anymore. I don't know why. It never happened previously. If I ask for 2 or 3 copies, I only get 1 copy.Also, I don't know why the Contro Center no longer shows on my DeskTop and why I can't instanll it in my task bard below. It used to work just fine.

Hi there
It may be the driver software try add and remove it and reinstall it again leave the USB lead out in till it ask you to put in when installing the driver.

I have put a PDF files on my website for you to download just incise you need one.

Just click on the links it will download for you.
It got all you need to know in this file.
You can read it on site and print it strait off the website or save it to your PC then print it out.

Click LINK= http://www.4all2sell.com/pdf/Brother-DCP-7010L-DCP-7025-MFC-7225N-MFC-7420-MFC-7820N-Manual.pdf

You will need an adobe reader to see this file if you not got a Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time.

you need to install the printer kindly follow this steps
Don’t connect the printer usb cable first
1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.

Your brother can send faxes without printing the pages try your computer just you should download the driver.

You can download the driver from this link: " http://download.cnet.com/Brother-MFC-8220-USB/3000-2118_4-65318.html ".

About the lines which appear on the print, you will have to buy a Drum unit for your Brother 575, because the drum cleaning blade has quit working and there is no other way to fix this only by putting a new drum unit.

note:
the drum unit is different from the toner cartridge, but if you search good you can find them together for lower price.

Please rate me

Has it printed correctly before?

(1) Try a power cycle: Try turning the printer off, then unplug the power supply from the printer, then unplug the USB cable from the printer then the back of the computer; wait 30 second; then plug the USB cable back into the computer, then back into the printer then plug the power supply back into the printer and turn it on – run a test print: Start>Settings>Printers>Right-click on the printer>Properties>Print Test Page

(2) Update the USB drivers

do you run mac or win as a pc system?

for pc: delete all drivers by help of the agressive remover tool (see: www.brother.com choose your country, your mfc and download the drivers needed).

Take mfc from power outlet and disconnect from usb port. Run the above mentioned procedures and reinstall the drivers again. When asked, replug mfc to power again.
Connect the usb cable directly to pc!!!!!!

If you run mac I cant give you an adivece yet, because I m not common to mac os yet (end of year I will know better cause will get an imac then, sorry!)

Hi,
The issue you have posted does require little more information in order to isolate the issue to fix it. Information like have you installed the printer driver and connected the printer cable to the system in your system for the printer to communicate, are you getting any error messages when you are trying to scan or print, weather you have used the printer earlier and it was working fine till the recent past or it was just being used for sending faxes only and printing and scanning was not tried earlier, However let me provide you few steps that you cold try to fix the issue.

1. Click on start point Control Panel and click on it.
2. In the control panel window click on the icon labeled “System”
3. Click on the Hardware option at the top and then click on Device manager.
4. On the device manage page check if you have any devices under “Other Devices option with a YELLOW ! mark, if so right click on the device and left click on uninstall.
5. Close all the windows and then insert the Driver disk for the Printer in the CD/DVD Disk Drive to install the drivers for the printer.

Note: At this point of Disconnect the printer cable if it is connected to the system tower, and do not connect the cable until the installation wizard prompts you to do so.

If you do not have the Printer driver disk handy then you can download and install the printer driver form the link below:
Brother MFC-3340CN Printer & Scanner Driver USB (Free Download)
http://www.driversdown.com/drivers/10429.shtml
Brother MFC 3240C Printer & Scanner Driver USB (Free Download)
http://printers.free-driver-download.com/Brother/25079/Brother-MFC-3240C-Printer-&-Scanner-Driver-USB-v.A-Windows-98-ME.html

1. During the installation the wizard will prompt you to connect the printer USB cable to the system tower, so go ahead and connect it.
2. Once the installation is finished restart the computer.

Should you require any further assistance regarding the
printer or even require assistance regarding any other
computer related issue in future please feel free to
contact me I will be more than glad to assist you.

Regards

Malik Khan

Can you print from another programm? Or is it just MS Works? And can you scan into a programm? If you cant do either, there is a problem with the USB or network connection. Please check plugs and cable. Anyway, it could be helpful to reinstall the drivers, too.