?question regarding my sansa clip mp3 player ?

http://www.sandisk.com/sandisk-support/driver-download-wizard

I think you don't need that disk. Every thing at http://forums.sandisk.com/sansa/ , Sansa Clip or Sansa Clip+ you can find it.
Good luck

Respected Sir,

I lost sansa installation cd (2gb). Kindly requesting you to help regarding this matter

Decided against buying the San Disk Sansa Clip because it does not appear to be Mac compatible. I do not like Windows applications as they always fail or cause other problems.

Visit Sansa's website and look in the accessories section. http://go.shopsansa.com/content/sansaclipreplace

They have them in a bunch of different colors. I lost my clip for a couple of days, but I was lucky enough to find it.

Hi,
Make sure the device is set to MSC mode under Settings on the device (Menu --> Settings --> USB Mode --> MSC )
If you already have music on your PC, follow the instructions provided in the following link to transfer music over to your Sansa Clip. 
Transferring Music to Sansa Clip from Windows Media Player 
Do let me know if you need further assistance.

It should be recognized by your computer. I did a search for drivers and they are not needed for this model.
For music, After the computer has recognized it has been plugged in. Start, My Computer, and it should show up in there as (my sansa or sansa clip) something along those lines. 
You may open it and drag your music files into the accroding folders inside the device.
OR You may use Windows Media Player 11 to Sync to your Mp3 Player. The Sansa Clip has problems with Windows Media Player 10 so i would reccomend using Media Player 11 to sync.
For future help or more questions please comment,
I hope this has helped :) 

Reformat clip with disk utility after looking at it like an external disk. Do this by turning it off. Puting it in lock mode. Hold down middle button as you plug it in.

I am mad at my Clip as it did the same thing.

Screen shot here:
Sansa clip not recognized.

Down load the firmware on Sansa's website. I have a Sansa 250R and it wouldn't work with the new replacement usb (Griffin) cord I bought at Best Buy. So I bought a Sansa Fuze and the cord that came with it worked on the E250R. Huh? Yeah, go figure...and oh, that replacement Griffin usb cord I bought worked fine with the new Fuze. I came real close to buying a new battery for the E250R but instead invested that money in the Fuze.

You can call Sandisk and ask, but if they will not, then I would buy a broken one off of eBay, and take the clip from there.