My mfc 420cn brothers printer want print

In order for your printer to work, you need a Software Installation CD (If you don't have it, you can found it on internet as a "driver" or "software"). For your model, click HERE , download this driver and then install it.

I hope I helped you!

(YES )stack them the same as regular paper. will work fine.

change data cable and drivers

I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were printing fine. I tried cleaning numerous time( 50 -100 times over 1-2 weeks ). Still no improvement. The way I print now is:
1. I go to Printer Properties
2. Change Media type from "Plain Paper" to "Inkjet Paper".
3. Change Quality to "Photo".

This takes a long time to print 1-2 minutes per page. However, this works for me since this is my Home printer and use it for printing only few pages here are there.

Good Luck
RK

You need to reset the printer software.

yes. you have to run the alignment feature. press ink - set - arrow-down til alignment. After alignment test print read the paper and choose the right setting by nr.

i reset the printer to the original factory settings, and now it works. thanks for your concern and help, richard

Where are the solutions?

There is only a manual double sided printing avaiable:
After the first side was printed you have to turn the page into the papertray again.

Canon bubble jet printers can do double side printing but the back side black print will be mingled through C/Y/M ink!

Can you print from another programm? Or is it just MS Works? And can you scan into a programm? If you cant do either, there is a problem with the USB or network connection. Please check plugs and cable. Anyway, it could be helpful to reinstall the drivers, too.