Orion ftdv2004 is stuck on menu and can't get off manually

Hello
It is impossible to make an auto tune function to this TV without its remote control, as there is no Menu button on its front panel. OK.

Hello
Three digit universal remote codes for Orion are:
035/ 121/ 135
Four digit codes are:
0121 0135 0035

Hi, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/
Regards,Jay__kmnh

Try purchasing one of the cheap "All in One" universal remote control handsets.

Hi and welcome to FixYa,

On the original remote of this TV, this would be 'Closed Caption' feature and could be disabled in the MENU/Settings.

Good luck and thank you for using FixYa.

Press the menu button on the front panel of the tv or the remote control. Use the up and down arrows to find the features section.Press the right arrow to enter the sub-menu for the features section. Use the up and down arrows to find the closed caption section. Press the right arrow to enter the closed caption sub-menu.Used the up and down arrows and the enter button to go into each of the features, use the right and left arrows to adjust each control for you preferred viewing.Press enter again to select the feature in each of the controls.When you are satisfied with you selections press menu to exit the feature. This information can be found on the PROSCAN website in the customer section under manuals. Go to www.oncorpus.com.the information can be found on pages 21 and 24 of owners manual for your model television.I hope this information helps you with your problem.

phillips universal remote with orion 1326 tv.
ned code

Greetings!

These Orions and the Emerson units built by Orion all revert back to set up after being unplugged for a given length of time. The situation can be rectified on the front panel without the use of remote. Please forgive if this seems over-simplified:

1. Turn on the set.
2. When screen appears push "FF" or "REW" button to select the desired language.
3. Push "PLAY" to move the arrow down to "Auto Preset".
4. "FF" to engage the auto channel programming.
5. When the set is done auto-programming the menu will clear and you use the set normally.

Good luck!
Rob

check your settings on both the tv and vcr.

According to Hitachi themselves, there is no such set with model number C29-F100. The closest one they have on file is the C29-F800. Perhaps your set is an over-seas set, originally sold in Japan? The original remote has a MENU button surrounded by 4 "arrow" buttons - arrow up, down, left and right. For the C29-F800, using the original remote, press the MENU button 4 times or the SETUP button once. There should be 4 choices on that page and the first one, the one on top, is LANGUAGE. Highlight the first one using the "arrow down" (also labeled P-) button and select the language ENGLISH using the left or right arrow buttons. Exit the menu by pressing MENU 3 more times or SETUP once. I believe I can download the owner's manual for the C29-F800 and send it to you if you need it.