When ever i turn my camera on a blue screen shows up and it says PLEASE TURN OFF AND ON THE CAMERA AGAIN. i keep turning it off and on but the same message appears. i've got new batteries in so i dont know if that is the problem.actually, the message only appears when im in the taking picture mode. i can see the pictures i've previously taken like a month ago but i cant do anything else. i would appreciate if someone could help me out on this.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Initially, let's try a hard reset by removing the battery. Let it be without batteries for a couple of minutes to about an hour. Thereafter re-insert battery and try again. Additionally, pls verify that the battery is fully charged
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
nothing is wrong with the phone, it is a normal function in every phone. If u leave the camera open for some time, it will go on standby mode, u have to turn it off. so better is that the moment u take a picture and there is a gap in taking the other picture, u turn the camera mode off. when u need it again, then again put it on.
Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...
But if this does not work send me an email i will try to think of some more solutions... CYA!
It is the falsh module that has broken and needs replacing. (probably not worth it on a W50 due to cost. but try the following. I have a method to stop the E:91:01 error flashing on the screen.it
were not solve the flash function but atleast you can use the camera
without flash. 1)at setup do a initialize. 2)go to flash function to turn off the flash (must do it fast,b4 the E91:01 appear,if not you need to reset it again ) by
now E91:01 will never appear.you can use it like normal,be sure not to
turn on your flash again or go to night mode.if not you need to perform
step 1 & 2 again.hope it help.
when I turn the power on screen is blue with "access" message. after a few minutes, message is replaced with "turn power on and off". I have removed and recharged battery but keep getting the same message and other functions of the camera will not work.
Try opening your camera, check the lens gear if its teeth are
complete. If so, check if something stucks on it. Its much better to
bring your camera to an authorized service center to re timing your
lens track... ^_^