Question about Sampo PME-42V3 42 in. Plasma Television
Got this tv for free, the guy told me that it powers on but not picture, said he called and told him it needs to replace a card or something like that, anyone knows what could be the problem or what to do with the tv to make it work, thanks.
Howzit Brother.
I had the same problem, but managed to repair it myself! There is no need to purchase a new
Power Supply! You can service the faulty PCB yourself, or give it to a Tehnician to service for you.
If you want to try service to yourself, here is how,
On the PCB marked QPWB11326-1B-4 you will need to do the following<
Replace the following Capacitor's, CS704(Most important one), CS705, CS706, CS707, CS708, CS713, CS715.
Replace the TOP210PFI IC marked ICS02
Replace the PC123 OPTO marked ICS03
Replace the TL431 Shunt Regulator marked ICS04
This solution should work! email me on [email protected] if you have any other requests!
Gavin Burger.
Posted on Nov 12, 2008
Probably needs the Power supply replaced
Posted on Aug 26, 2008
759 views
Usually answered in minutes!
It powers on but no picture. Anyone, please help.
I got this Sampo PME-42V3 Plasma from my Brother inlaw and it does not work. It powers on but their is no picture. Do you know what it might be? Can you help me?
Thank You
Tony
Got this tv from a friend & hooked up to cable box....have picture but no sound.
I need a repair manual for that model(PME-42V3). Can anyone help?
My PME-42V3 shows bar in image and after a while there is no picture like it goes on standby mode. After few minutes of waiting we can turn it on but same problems happen.
Please help
Kashif
×