Question about Motorola Mobility E815
The phone can be programmed over the air with one step. First, call *228. Once that finishes, call any number and the programming will be complete. The programming menu is accessed from the home screen by quickly pressing "menu", 0, 73887*. At this point, the phone prompts for the Security Code, which is usually 000000 on Verizon, Alltel, and Amp'd, and 236197 on Bell. However, it's possible that this number could be any number at all. Once in the programming menu, the user can manually activate the phone, configure web browser sessions, GPS, Get It Now, and Test Mode. The security code is not the same thing as the SPC (Subsidy Provider Code). Of the carriers that support the e815, only Canadian carrier Bell Mobility uses a subsidy lock code. Verizon, Alltel, and Amp'd do not use SPCs. The SPC is needed to access any of the services located in the aforementioned Programming Menu. There is no default SPC: it varies from phone to phone. The SPC for a Bell Mobility e815 is located in seem 0055, Rec = 1, Bytes = e. The SPC code is usually a 6 digit decimal based number. If this does not work contact your service provider, as they may have to change the simms or unlock it. Good Luck
Posted on Jun 12, 2007
Contact your service provider it will be better and less hasseling.good luck. good work techman.also you Dinoza keep up the good work.
Posted on Jun 18, 2007
Hi carzylou, Unfortunately there's no magic spell that will unlock your phone :-( Here are your options: 1. There's a service by http://www.unlockitnow.com/remote/unlock/by_imei/Motorola/unlock/E816_unlock.php that can instantly recover your phone but it will cost you $39. 2. You can use the operator's service: Cingular ($35)- http://www.unlockitnow.com/remote/unlock/by_operator/USA/Cingular/unlock.php?brand=Motorola&phone=E816 Tmobile ($45) - http://www.unlockitnow.com/remote/unlock/by_operator/USA/TMobile/unlock.php?brand=Motorola&phone=E816 Let me know if there's anything else. Best, D.
Posted on Jun 12, 2007
SOURCE: 4 digit unlock code on phone
the defalt code for your phone is 1234 the best advice i can give you is contact motorola and speak to a tech their they have codes to unlock them there is a trick we try some times take your battery out while phone is on some times shocking it will bypass security and if works perform a master reset on the phone that will change every thing back to factory settings the defalt security code for a master reset is 000000 hopefully this will help
Posted on Feb 16, 2008
SOURCE: Motorola Razr Security Code
if you're looking to view the security code, you need to dial six 0's not four. If you want to get into the programming menu dial #073887* fastly and enter the six zeros.
Posted on Apr 08, 2009
The default is the last 4 digits of your phone #, however, if at any time it is changed or you don't know it dial *228, select option 1. This will reset it back to the last 4 digits. Hope this helps : )
Posted on Nov 07, 2009
Tips for a great answer:
Usually answered in minutes!