My dvd rom is not working becouse an error in driver HPDVDRAM GS30

I had to put my experience to tell you, I went to www.zescode.com , not only solved my problem and recommend it to friends say good, great job, but it only took me a little money, that makes me very happy.

If it truly needs a driver then install patin-couffin It will bypass all that windows uses now and accurately talk between drives and the dvd-rom. But it sounds to me that your dvd-rom just failed. You never know when they are going to go

Hi,Dear Friends..
Your win7 registery not repair i think some problem occur.
Flow instruction:-
1> Change you current windows7 cd. because i think some error obtain.
2> Another you DVD ROM lance week and not read CD properly.
3> Your Hard Drive create bad sector. When you install windows.


Solution:-
A> Used new windows7 CD.
B> Change DVD ROM Driver.
C> Change HDD Device Driver.
D> Change Install windows location.


Thanks...

Hello there,

Try this trick,

1. Go to Hardware Profile and Remove your Asus ROM profile.
2. Shutdown your Machine -
3. Remove the Asus ROM from your Sata Connector.
4. Turn your Computer ON without that ROM
5. Shutdown it again, and Reconnect your ROM to those Sata connectors
6. Comment back here if still not working. :)


Cheers!

Hi, this is a common problem, I have put a link below to do a free driver scan, hopefully it will detect the drivers you require.
http://www.opendrivers.com/modeldriver/Toshiba_notebook_Satellite%20M50-driver-download.html

Yo' Sam!

Start by checking your WINDOWS CONTROL PANEL. Be sure there are no errors for your drivers. IF you have your proper drivers for your DVD Drive, totally remove ALL drivers and then restart your system... still have problems?

Next TOTALLY DELETE your Roxio program... somewhere on the Internet there is a tool that will do just that. You want to try your best to CLEAR and ALL hard drive and REGISTRY traces of ROXIO program(s)!

Just ONE bad ROXIO/REGISTRY problem can have you chasing your tail for days/forever.

With ROXIO deleted, try one of the FREE DVD burning programs to assure it's not really a DVD problem?

I just did a GOOGLE check and there are tons of hits for you.

Hope this helps!
Anthony

When you try to write data to an optical disc, you may experience any of the following symptoms:

* You receive various disc write error messages.
* You experience issues with the drive and the built-in recording feature of Windows XP.
* You experience issues with third-party programs that you use to write data to the disc.
* You cannot read the disc in all versions of Windows.
* You cannot read the disc, or some files on the disk, by using an MP3 player.
* When you add files or folders to a disc that already contains data, some files are lost.
* Recording files to the disc is inconsistent.
* The disc recording operation is consistently unsuccessful.

TROUBLESHOOTING

Troubleshooting specific errors
If you experience one of the following errors, follow the appropriate steps to resolve the error.

* There is no disc in the drive. Please insert a writable CD into drive.
This error can occur if the CD-R drive or CD-RW drive is not recognized as a recordable device. This error can also occur if the device driver has been corrupted. To resolve this issue, see Method 3 in the "General troubleshooting" section and Method 1 in the "Advanced troubleshooting" section.

* Drive not accessible, incorrect function
This error message typically occurs when you try to write to a CD-R or a CD-RW, and the Windows XP built-in disc recording feature does not recognize the CD drive as a recordable drive. This error message may also occur if specific third-party programs are installed. For more information about how to troubleshoot this error,

when you access the CD-ROM drive, the DVD-ROM drive, or the CD-RW drive
* Error Deleting File or Folder.
Cannot delete file name. Files on this CD-ROM drive are read-only. You cannot copy or move files over to this CD-ROM drive.

This error message can occur because individual files cannot be deleted from the CD-RW. You cannot use the CD disc recording feature of Windows XP for random-access storage while you are writing to disc.

To set the service to Automatic, follow these steps:
1. Click Start, click Run, type services.msc /s, and then click OK.
2. Double-click IMAPI CD-Burning COM Service.
3. Under Service Status, click Start.
4. Try to write data to a CD.

This issue is cause when the print spooler service isn't running, MFL pro installs the printer driver 1st (after paperport install) which will not wun if the service is disabled

You would probably do right to reinstall Windows. The bios handed off to Windows long before the splash screen comes up. It is probably a faulty driver or corrupt registry entry. If it was me I would reload Windows

need driver for LG GCC-4522B