Question about Memorex MK1980 (14 Channels) 2-Way Radio

2 Answers

Freezes every time I turn it on the screen stays exactly the same and every thing I push dosent do any thing.I am sure that the lock mode is off!

Posted by bob chicken on


2 Answers


Regarding order placed on may 08 2006 for netzero internet service by molly albright in elk creek calif pobox 322 on my credit card # 4802 0992 6081 2627 for i-rock transfer larry smith which I terninated on about 10-8-07 when i discovered the illegal abuse of my credit. have contacted sheriffs office in colusa calif i know need a copy of the order placed with net zero on may 08 2006my molly albright on my credit card so I can turn over to the detective in colusa please mail copy to larry smith po box 623 williams calif 95987 you may reach me at my cell # 562-8842242. thank you larry smith

Posted on Jan 09, 2008



  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 123 Answers

Are you sure the batteries are ok? the battery contacts are clean?

Posted on Jun 12, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My galaxy s5 screens stays on all the time unless I push the button to turn it off. It never did this before, how do I fix it

Try *Settings* *Display* and make sure the box in the *Smart stay* item is NOT CHECKED. This may or may not be it depending on if you continue to look at it or if you place it close to something where it thinks you're looking at it.

If the above isn't checked, you could try selecting *Screen timeout* and change the minutes. Try changing it to 15 seconds, then set it aside and see if the screen goes off after fifteen seconds. It might be that for some reason the timeout is no longer registering and resetting it might get it to time out again.

One other thing. If you have some kind of a screen protector film on it make sure it is clean and has no scratches in it or moisture under it. If the screen thinks it's being touched it won't time out.

If neither of the above does it, I'm at a loss to think of what else it might be. Good luck.

Feb 13, 2015 | Samsung Galaxy S5

1 Answer

The hook race wont stay in place in my babylock Grace

Make sure brace that holds hook is locked, bobbin is pushed in til you hear it click and hand turn machine and if you hear it hit any metal, machine timing is out, let me know...thanks

Feb 28, 2014 | Sewing Machines

1 Answer

Turn monitor on and the light stays yellow will not turn green and screen stays black

When it lights up the yellow light instead of the green one, that means that the monitor is not getting a signal from the computer.
The things to try (from simplest to most complex) are:

  1. Make sure the computer is on and not in "sleep" mode -- press the "Caps Lock" key and see if it lights up the caps-lock light on the keyboard.
  2. Make sure the video cable is connected from the computer to the monitor (that the cable hasn't come loose on either end)
  3. If your monitor has multiple inputs, make sure it's set to the right (probably analog VGA or DVI) input
  4. If your computer has more than one video output (like a laptop with it's internal screen plus the external monitor) then make sure the external monitor is enabled
If none of those solve it, post a comment back here and we can dive in to the more complex tests

Sep 06, 2010 | Computers & Internet

1 Answer

It keeps freezing.

Sounds like your is overheating. You might want to make sure your CPU fan is spinning. Another good thing you can do is download a little program called speedfan
this will tell you the internal temp of your processor and hard drives and if your fans are running. If the fans are running and the cpu is staying cool, I would then do a full bios test on the hard drive itself as well as a chkdsk /x through a command prompt on the hard drive (from safe mode). Let me know if these don't resolve the issue.

Apr 16, 2009 | Toshiba Satellite A135-S4527 Notebook

2 Answers

A85 LCD stays off in all modes except "stitch"

Hi Toonz
I have exactly the same problem as Shimoni and Antonio with my 4 years old A85.
But sorry, its not a problem of the CCD, cause we all get a clear actual picture on the LCD but just in stitch mode! In any other shooting or playback mode the LCD is dark. So the sensor must be working well and Canon Germany doesnt repair for free. Our failure is different and we have to pay much more than the camera is worth ;-((
Dieter, Munich

Aug 28, 2008 | Canon PowerShot A85 Digital Camera

1 Answer

Freezes and displays white screen when starting

hardware fault ..90% chance at pcb level or short circut at the lcd flex cable? needs troubleshooting.

try a firmware update just to check if this is happening due to corrupted software. I dont thing so but there is a small chance..

Regards Theo

Feb 11, 2008 | Sony Ericsson W300 Cellular Phone

2 Answers

Laptop boots up intermittently or screen freezes

basing on the information you have given here are the possible solutions:
remove any external device connected to your system (printer, external hard drive and others) if removing this does not work and still gets a blank screen with blinking cursor try to go to safe mode with networking. if successful try to download the driver for your video adapter.

when you try to start the computer , do get anything on the screen like a logo? when does the blank screen occurs, is it during the turning ON of the computer or during the windows xp logo appears on the screen?

a blank screen could be caused by the following: defective video adapter, corrupted video driver, defective memory, unknown device causing the issue like the hard drive, optical drive or other peripheral installed inside the computer.

try also using an external monitor

Sep 19, 2007 | Toshiba Satelite 5205-S505 Notebook

1 Answer

Can't make or receive calls--locks up

BDEATH HERE. Try flashing it. start your motorola by pressing *#and red key at same time to see if get in bootloader mode. Also if by chance find the same battery and try again.. If it gets in a boot mode then you need three programs. Up then i will quide you again. LONG WAY!!!

Sep 03, 2007 | Motorola Mobility MOTOKRZR K1 Cellular...

Not finding what you are looking for?
Memorex MK1980 (14 Channels) 2-Way Radio Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Radio Communications Experts


Level 3 Expert

1664 Answers

Brad Brown

Level 3 Expert

18596 Answers

Tom Chichester

Level 3 Expert

61336 Answers

Are you a Memorex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides