Samsung 62" rear projection t.v. model # PCL6215R

Television powers off on it's own at all different times.T.V. will power off after a few minutes or it may play for up to week at a time.Sometimes it will power off and on two or three times in a row before shutting off completely.When it does this, it will go to green screen in between shutting off. To get t.v. to come back on, I have to unplug it from wall for ten or fifteen minutes and replug. HELP!!!!!! please.

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
1,476 Answers

The most likely problem is a bad solder connection on one of the circuit boards. If you have the skills, remove the boards and look at all connections for cracked solder joints or cold solder joints. Resolder anything suspicious.Good luck.

Posted on Jun 13, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Every time I press a button the tv turns off. What would be the cause?

Hi,
Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

I think this will help in solving the problem......

Read full answer

Oct 25, 2010 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer

Screen looks distorted when on, what should i do?

Tried push the FOCUS buton on the remote or tried convergence aligment,R,G,B colors lines don't lines up,picture have colors shadows or 3D pictures?The tv have a convergence pronlems,it dead.The tv convergence board is dead.Try website like Tvrepairworld.com to buy a whole convergence board for the replacement.The AKAI/SAMSUNG tvs are using the same convergence board.

Read full answer

Sep 22, 2010 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer

Double picture one image all red

change the areial direction

Read full answer

Dec 18, 2009 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer

Picture quit and burning smell

Hi,,,

In this case the convergence IC was burn that's why you can smell burning and the picture quit, so you need to replace the convergence IC

Regards
PCmania

Read full answer

Jul 08, 2009 • Samsung PCL6215R 62" Rear Projection...

2helpful

1answer

RED LINES ON TOP AND BOTTOM OF SCREEN

Hi, the convergence IC`s have failed and possibly a few resistors, unless your very proficient at soldering and un-soldering this is not a repair a layperson can do. Besides replacing the shorted parts there is an alignment procedure that must be done once the IC`s are replaced. To give you a "rough" idea we charge $246 for this model set, different geographical locations will charge different amounts so my charges may not be relevant in your area, hope this helps, video-tek

Read full answer

Feb 06, 2009 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer

Input jacks

You might want to check the connections on the boards. He might just have not plugged them in or may have them seated wrong.

Read full answer

Aug 08, 2008 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer

Red convergence lines

Yes, but it sounds like its a solderd related issue because it clears up. Try resoldering the Convergence ICs and if that doesnt help they will need to be replaced.

Read full answer

Jul 23, 2008 • Samsung PCL6215R 62" Rear Projection...

0helpful

1answer