Ifit console will not load keeps running in a loop?

The machine is struggling under load, it’s either a really badly damaged running belt with no lubrications. Or, a motor on the way out. Or, you are exceeding the weight limit of the treadmill.

If you wish to get some details; check the site linked here. Pull up older posts. ...
http://electro-medical.blogspot.com/

Turn it off from Machine build switch, then turn it of from mains, then unplug it from mains, wait for some time and then Plug it to mains, switch on from mains and switch on local machine switch. If the process above fails, you should contact the Dealer or Authorized Service Center.

follow this steps and fix it. GOd bless you
In the support documentation for iFit Live (in particular for the wireless module), the manufacturer highlights a known issue with the installation not completing upon using the device for the first time. The module needs to be formatted using your PC and the software should be reinstalled. Close the iFit software if it's running and attach the wireless module using the provided USB cable. Open "My Computer" and look for the "iFit" to be listed with an assigned drive letter. Right-click the icon and choose "Format..." Click "FAT" (not "FAT32") and uncheck "Quick Format." Click "Okay." When the process completes, disconnect the module then uninstall the iFit software. Install the newest version from the company's website, then reconnect the module with the USB cable and run setup again.

Wow, lots of scary posts. If I had read this before, I would never have bought it. :)

Anyways, there is a solution. I dont think this post was ever resolved, so I ran across this site that offered a few steps that allowed me to fix the reboot issue and a few nice folks who would reply to any questions.

This sounds like a common problem with ifit on treadmills. I came across this site a few weeks back and it helped! There's a few folks there that could offer suggestions too. best of luck!

https://thatguyreviews.com/treadmill-display-rebooting-ifit/

Hope this helps!

I just had the same problem. Of course tech support is closed so I sent an email. We'll see if they get it fixed tomorrow.

It could be your hard drive problem. Which I called it, "Crash." I would suggest you try to format the hard drive and reload the operation system with your installation CD.

You'll have to check if windows is loading before it restarts. If windows starts loading before it shuts down and just loops all over again, you can easily fix this by simply re-installing your operating system. you can do this by booting from the recovery discs that came with the laptop. Now if the rebooting cycle happens before windows starts loading then this could either be a RAM or a motherboard issue and will need to be serviced.

If you don't have a copy of the recovery discs, you can always call Toshiba at 1-800-457-7777 and purchase one from them.