Hi have bought tomtom navigator 6 for my ipaq 6515. software seems fine but the unit is not receiving any gps signals. Have read that changing settings to com7 daub rate 57600 should help. How is this done?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi you need to reset the unit at the back near the connection there is a small button that needs to be held down when holding the power button on for a few seconds. once you have done this turn it on and it will work fine
The ipaq 6515 has a microswitch that will turn off the pda if the battery cover is removed. When you remove the cover and try to turn it on even with the external power supply plugged in, the red led will light up.
Firstly the GPS on this model is not a standard GPS, it uses AGPS which requires an update to be performed either ever 2 or 10 days, depending on the rom version of the ipaq.
This annoying thing normaly occurs when the update is out of date. On the home screen, in the bottom right hand corner, you will see a circular icon with grid lines and a dot in it. If it is blue the update is good, grey means it is out of date.
There are several ways to update this, the easiest being having your iPaq connected to active sync, then tapping the above icon, tapping download now.
However, if you have recently performed a soft reset, you will need to perform a hard reset to resolve the issue (this will wipe all your data so back up first!!!) Then re-install tomtom and try again.