Driver korg d3200 - Korg D3200 Digital Studio

If you contact Korg, they can send you a dowloadable link to burn the software to a disc.

I will assume you want to sync the two as one. I have one of these sitting in a closet. The 3200 will record 12 tracks at a time if I remember correctly. I believe the Korg will sync to Midi Time code. I just wonder if the midi implementation allows for start and stop code. Anyway, I found this information:
x2. MIDI messages used by the D3200 Note On (Note, velocity), aftertouch, pitch-bend:
The D3200 uses these messages to control effects.
Program change:
The D3200 uses these messages to switch scenes.
Control change:
The D3200 uses these messages to control mixer and
effect parameters.
MMC (MIDI Machine Control):
MMC messages can be transmitted from the D3200 to control an external MMC-compatible sequencer or recorder. MMC messages received from an external sequencer or recorder can be used to control the D3200.
MTC (MIDI Time Code):
The D3200 can transmit or receive MTC messages to
synchronize with an external sequencer or recorder.
MIDI Clock:
The D3200 can transmit MIDI Clock. It can also receive MIDI Clock if you have selected MIDI Clock for the tempo track and are recording the tempo track.

If you have electronic expeerience, take it to a repair shop. You can cause more damage okiong around if you don't know what you're doing.
Past that, contact Korg customer service for the schematic and parts list. The part should be available from Korg directly of from Mouser
http://www.korg.com/us/support/contact
Korg Parts Parts Is Parts Guitar Parts Amplifier Parts Korg Keyboard Parts
Mouser Electronics Electronic Components Distributor
Korg Full Compass

It sounds like the drive isn't working correctly. i suggest taking it to a Korg authourized repair shop to get it looked after as they will have better access to the needed parts. You can find one in your area through this link-
http://www.korgusa.com/KorgDealers

Here's a link to to the korg site to download the manual and there is a link on the page to reset: http://i.korg.com/SupportPage.aspx?productid=223

The import needs to happen from a computer (or a CD-RW) >D3200, not from a flash drive or backup drive.

Did you try boot from the CD with the OS? is it the Same? Did you replace the hard dirive with another?
Is the HDD/CD disk light flashing or illuminate during power up? It should!

yes- check out the m-auduo studiophile speakers & there are other brands that are better depending on your wallet.

Unless you are electronically adept and have certain tools I would NOT attempt this yourself. You could damage the circuit board causing great repair expense.

Korg is a great company and when you contact them they will help you. They can tell you how to get the CD and/or how to download and burn it to your own CD. then you can boot up the device