My jvc dx-t9 when playing fm station or dvd shuts down

Service Manual

JVC DX-U10A SERVICE MANUAL Pdf Download ' ManualsLib

https://www.manualslib.com > ... > DX-U10A
View and Download JVC DX-U10A service manual online. COMPACT COMPONENT SYSTEM. DX-U10A speaker system pdf manual download. Also for: Dx-u10un, Dx-u10ux, ...
Missing: receiver ‎' Must include: receiver

..

if its factory it should play threw the speakers there is a master shut off on the radio face if aftermarket it will play threw the radio you just need to find the fm station to tune in most are lower fm stations 88 89 etc

Don't quote me I believe you can download software that rectifys this.

Have you a drop down setup menu, it could be like a lot of digi's these days you still have to click a menu to turn an item on?

If you know how to measure, then check Transformer output (Low voltage). If not good, replace the transformer

You must be using an FM modulator then - the easy way is to put a cd in and press play then do a tuning search on FM and it will find it. Then save that station

Uninstall it. shutdown and disconect it. Rebooot your system. and shutdown again. Connect the device and boot again for the PC to detect the hardware and install again.

Yep, you'll see a Play/Pause button. Just press that until it says DX Seek (or Seek if you want to skip over stations that are slightly farther away). Then press your tune buttons! If it still doesn't work while in DX or DX Seek mode, then hold the tune button for a second. It'll beep and start scanning to the next one!

I figured it out!! YAY!!!!
so here is how you set the presets:

- click source until you are on the FM radio
- click down or the play/pause button... this shows the presets
- pick which present you want to set your station on by going right or left
- press and hold down or play/pause button until preset number starts flashing
- once flashing, use right and left arrows to select your station (if you wait too long it will stop flashing and you will have to start again)
- once you have gotten to your station, push down or the play/pause button one more time, and it should be set!!

hope this helps, good luck!!

christy*

Hi, in the menu check that the output is set correctly for dvd playback. ie not through the preout for an amp. It is possible for the unit to be set up to play surround sound for dvd's. Worth a try?

Try this: "Hold FM/AM and Press #5". This solution is for a different model JVC stereo, but hopefully it will work for yours as well.