The wrench light on my pronto sure step m91 blinks 5 times

SOURCE: no bower to the controles

bad charger

SOURCE: Change Batteries in Pronto M91 with swivel seat.

Turned out to be a "doh!" moment. Use the lever on the side of the seat to permit swivel. Unplug Controls connector. Lift seat off unit. Remove battery compartment cover by loosening 2 Philips-head screws on the Charger cover at the rear. Disconnect cable to Electronic Controller at front of front battery. Disconnect the Red and Black battery connectors, the ones that join the 2 batteries. Lift out batteries. Transfer battery connections to new batteries. Reverse the above process to reassemble.
Solved this without any help from outsiders, including FixYa, who wanted to charge me for the solution.

SOURCE: tool; light blinks 9 times battery is charged

the batteries were dead

SOURCE: One of my residents has a Pronto M91 Sure Step and

just replace the keypad or if you are mechanically inclined remove joystick take the top off and glue a small piece of foil to the bottom of the on/off button reassemble and try that if that doesn't fix it order a new pad from a provider in your area

Testimonial: "thank you so very much for your help. It is much appreciated. Have a great day."

SOURCE: batterys charged. I turn switch on. all the lights

truffles e-mail me at [email protected]. I need to know if you are getting any flashing lights on your joystick and are you hearing the brakes click when you move the joystick. Thanks