Ok i put my samsung yp-u2j in my computer i get my music from LEGAL P2P sites and for some reason when i go to get rid of files or put on files it says that the mp3 player is disconnected. my files still play but listining to non stop ac-dc for like 20 minutes straight got annoying. i shut off my computer took off some frograms not related to make my pc faster and i cant find out why my mp3 player is being so odd can you please help me
Change Windows Media Player11 back to Windows Media Player10. To do this: 1.Go to control panel and remove Windows Media Player11. 2.A notification will come up telling you if you remove Windows Media Player11 it will roll back to Windows Media Player10 click OK. 3.Save and exit all programs and rolling back will take a few minutes. 4.Restart your computer. Quite a few files might be missing from your MP3 player but just put them back on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
email should be posible by being online at the sam sung web site help area how ever there should be a adobie down load direct too your computer threw the internet sam sung web site good luck please post on how it goes thanks
Remove Mp3 player if you already connected to the USB port
Run the program (You should see something like: Please connect the device)
Hold down the Play button and connect the Mp3 Player to USB port
(Hold down the play button while you connect the device, you should see
a message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
After you hear the Windows chime "new device found" or the message
"Initializing" on YP-U2J Updater, you can now remove your hand from
Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
Click the "yes" button
Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
IMPORTANT: After updating the firmware, you MUST
disconnect the Mp3 player and turn it on. You will see a 20% message
for about 50 seconds and it will be restarted automatically.
keep in mind that if you sync your Mp3 player with a computer that has
a Windows Media Player 9 or 10, you should do these steps again
hmm i got the same problem as jenn1519 ill plug mine in and when i usually plug it in the computer makes a bing noise like it recognizes that its in the usb plug but 2 seconds later it will make the bong noise that i unplugged it which i didnt so i cant put any new music on. it will charge but it wont let me get any music on. and windows doesnt read that its in there.
and also my mp3 player is very important for me its a gift from a friend so plzz plzz help ? :(
tanko!!! its ma emil add [email protected]