Port Forward With 2 Routers?

http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660R-D1/World_of_Warcraft.htm. this should walk you thru step by step

http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660HW-D1/P-660HW-D1index.htm
Use port forwarding to sort out ya problem, find you router, and it will show you what to do.
www.devicemanuals.com/guide/.../ZyXEL/ZyXEL-P-660HW-D1-3-40-User-Guide-TkRjNU9EUT.html - 21 hours ago
User Guide above.

You have to forward ports on the router, the ports to open i will list:

port 88 udp

port 3074 udp

port 3074 tcp

you have to TURN ON both FIREWALL AND NAT, and then configure the nat forwarding + firewall rule and then it will work
it's a known bug @ zy boxes

i will repost my guide for opening nat and firewall on a zyxel ...
it will help for sure ...



you can't just say nat is now OPEN :)
let's say you have a pc with IP of 192.168.1.33
you are running a emule (hehe) on that PC
you want to use port 12345 for your emule
this is what you need to do:
1. go to webinterface of your router (usually http://192.168.1.1)
2. go to menu network/nat/port forwarding
3.go to service->user define
4. in new window click "active", name it emule, start port 12345, end port 12345, server ip 192.168.1.33
5. click ok, apply, whatever and go to menu security/firewall/rules
6. choose packet direction wan to wan/router
7. click on ADD
8.change following fields: destination address - change to single addressand change 0.0.0.0 to 192.168.1.33 and click on add, then close to itsays ANY, mark it and click on remove
9. on same page under services click on edit customized services
10. choose number 1 or 5 or whatever :)
11. service name: emule rule, service type TCP/UDP, type single, port 12345
12. click on apply
13. go to menu maintenance/tools/restart
14.just in case restart the box and your zyxel is now accepting incomingconnections on port 12345 and forwarding them to 192.168.1.33 (your pc)...

i hope i helped

cheers

-tomba

I to am having the same problem

To log in to the router in order for you to do a port forwarding you can follow the steps from this link, but if the default username and password didn't work reset the router so it will be back to its default settings http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660HW-T1v2/Age_of_Empires_III.htm

well to start, your connection would possibly be ADSL and your zyxel is set to provide DHCP address on your network, so its router capabilities could be turned on.

if this is true, you may need to rework the connection settings.

here's a recommendation:

1.set your modem to bridge mode (bridge only)
2.this will then be allowing your linksys to manage your DSL connection through PPPoE
3.after so, your linksys router should get a public IP address for an internet IP when you go to status tab (not an IP address starting with 192.168.1.xx)

after so, you may reconfigure your port-forwarding.

the reason why you will need to set your modem to "bridged" only is that if it is not, your zyxel's firewall is also turned on, provided that the linksys' firewall is always on. so even if you define which port will be opened on the router, it will still be blocked by the modem's firewall.

do port forwarding you get it.

Hi,

Please find the URL below which will help you getting the port forwarding done.

http://portforward.com/english/routers/port_forwarding/ZyXEL/Prestige660R-61/default.htm

with regards,

TPV