Question about Logitech FreePulse Wireless Consumer Headphones

20 Answers

Connection My wireless headphones stopped connecting to each other. The Headphones are showing a solid red led while the wireless connector is showing a blinking light. I have reset the connector. Is there a reset button on headphones and if so where??? Tried holding both buttons together no connection.

Posted by robert hackleman on

  • 17 more comments 
  • Anonymous Nov 04, 2007

    they dont connect ..they stay red but dont work ! help me pls

  • repperch Nov 04, 2007

    My wireless headphones stopped connecting to each other. The Headphones are showing a solid red led while the wireless connector is showing a blinking light. I have reset the connector. Is there a reset button on headphones and if so where??? Tried holding both buttons together no connection.

    help me plsss

  • ozarock Feb 16, 2008

    My wireless headphones stopped connecting to each other. The Headphones are showing
    a solid red led while the wireless connector is showing a blinking
    light. I have reset the connector. Is there a reset button on
    headphones and if so where??? Tried holding both buttons together no
    connection.

  • Anonymous Feb 17, 2008

    my headphones blink but adapter issolid red anyone have a solution?

  • Anonymous Feb 22, 2008

    SAME AS BEFORE

  • jgriffee Mar 03, 2008

    Same here

  • Pluch Mar 11, 2008

    Im having the same problem

  • Anonymous Mar 13, 2008

    same here

  • marcilicous Apr 03, 2008

    i just got my freepulse head phones and they dont connect with each other. i turn them both on while they are blinking and they dont connect.

  • willow8640 Apr 09, 2008

    can't get my headphones to connect

  • Flashduck May 14, 2008

    Worked fine at first however now I can't establish a connection. Attempted to use reset button.

  • Anonymous May 20, 2008

    LED from the transmitter flashes a red light but the LED on the headphones is a solid red light.

  • sugarzz May 28, 2008

    my headset n the connector does not connect to each other anymore...help please......cant live without it....:(

  • sugarzz May 28, 2008

    i've tried on/off both the device at the same time but it didnt work...i've also tried charging them to full but yet...nothing seems to be in vein.....help is in need....:(...please.....

  • Anonymous Jun 27, 2008

    My wireless headphones stopped connecting to each other. The Headphones are showing a solid red led while the wireless connector is showing a blinking light. I have reset the connector. Is there a reset button on headphones and if so where??? Tried holding both buttons together no connection.

  • sgotama09 Jan 31, 2009

    Thanks it works!!

  • Anonymous Feb 24, 2009

    Thanks, this advice was very very very helpful..and definately solved my problem!

  • Anonymous May 19, 2009

    sweet!

  • Anonymous May 21, 2009

    Thank u so much, this fixed my problem!!!

×

Ad

20 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thank you SO much , i know this is old, but i recently had mine repaired and i thought i'd have to do it again but you saved me a weeks worth of stress, and renewed my faith in logitech, as if i EVER doubted them <3333

Posted on Jul 06, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

OMG thank you!! You are a lifesaver! I go to meetings where inconsiderate boobs snap their gum and I have to drown them out somehow and these wouldn't pair last night and I thought they were gonners!!

Posted on Feb 26, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks so much. this totally works.
-el

Posted on Jan 24, 2008

  • Anonymous Jan 24, 2008

    you rule. this totally worked.

×

Anonymous

Your a complete LEGEND, thanks soooo much!

Posted on Apr 03, 2008

Anonymous

Like everyone else said, thanks so much. Great answer, even very well grammatically written! Haha thanks so much though, for real.

Posted on Mar 27, 2008

Anonymous

Very useful thanks a million I was gonna trash them if not for you

Posted on Mar 26, 2008

Anonymous

I love you. ;-; I was so ready to throw these things against a brick wall or something. xD

Posted on Feb 15, 2008

Anonymous

Excellent! It works! Bless you!

Posted on Jan 19, 2008

Anonymous

YES!!! Thank you!

Posted on Jan 07, 2008

Anonymous

Thanx so much i was about to jump off a bridge it was that fricken annoying

Posted on Nov 19, 2007

Anonymous

Thanks this really helped...

Posted on Nov 19, 2007

Anonymous

Thanks ey, good lookin out.

Posted on Oct 29, 2007

Anonymous

What everyone said.....Thank you!!!!

Posted on Oct 23, 2007

Anonymous

Thank you for this very much! this was probably on the manual but I came across this first so thanks!! but why do these headphones tend to do this then? is it

Posted on Oct 19, 2007

Anonymous

Thanks worked great.

Posted on Oct 19, 2007

Anonymous

Hello I had the same problem as you, red LED on solid all the time. The fix is to hold the button down for 10 seconds or more and the red LED will go out. Continue to hold the button down for as long as it takes and after a while the LED will begin to flash reb/blue very fast. It's now ready to pair with the transmitter were once again you do the same thing, keep holding the on button down for as long as it takes to start flashing red/blue. Do this even if the LED goes out for a short while. Once you have then both flashing they will then detect each other and pair and go solid blue. Let me know how you get on.

Posted on Aug 03, 2007

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Awesome! I was totally lost!

Posted on Jan 17, 2008

wc127233

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks! Worked perfectly as described!!!

Posted on Dec 03, 2007

  • wc127233 Dec 03, 2007

    Thanks, solved my issue! Works exactly as described!!!

×

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks - i was going out of my mind trying to figure it out myself!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted on Nov 11, 2007

  • Anonymous Nov 11, 2007

    Thanks - i was going out of my mind trying to get them to connect!

×

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can't thank you enough for the information...

Posted on Oct 30, 2007

  • Anonymous Oct 30, 2007

    That was truly helpful...I was going crazy trying to figure it out.

    Thank you very much

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Sylvania wireless headphones

Instructions
1
Set up the transmitter. Wireless headphones rely on a transmitter that sends audio via infrared or radio waves to your headset. Use the digital audio output (coaxial or optical), RCA outputs (red and white) or headphone jack on your TV to connect the transmitter. The connection will depend upon which outputs are available on your TV and/or the transmitter.
2
Use an RCA-to-headphone adapter. If you don't have a headphone jack on your TV and the transmitter includes only a headphone connection, connect an RCA-to-female headphone connector. This will allow you to plug the wireless transmitter into the female headphone end and then hook the RCA ends into your television's audio outputs. You may also need a 3.5 mm (mini jack)-to-1/4-inch adapter if the headphone plug on the transmitter doesn't match the television jack.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html
3
Set the transmitter on top of, or next to, the television. For infrared transmitters, you'll need a direct path between the headphones and the transmitter. Placing the transmitter on or near the TV will allow you to take advantage of the clear path you already have.
4
Plug in the transmitter and turn it on. Charge the headphones if necessary.
5
Turn on the headphones. Adjust the volume and settings and you're ready to watch TV.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html

good luck

Nov 14, 2013 | Sylvania SYL-WH930GB Wireless Headphones

1 Answer

I am attempting to use my sennheiser rs 110 headphones with my lcd-led tv. the componet jacks coming out of the transmitter are red and black. All my componets on the tv are red and white. so when i plug...
What are you plugging your 2 RCA connectors (from the headphones) into on the television?
You are correct, usually:
White = Left Red = Right

In this case
Black = Left Red = Right
Not sure....guess some manufacturers need to be different...
Back to the issue,
You to need to connect the Black to White and Red to Red to the TV BUT you need to make sure you are connecting to an OUTPUT and not to an INPUT on the TV. Most newer TV's do have an "audio out RCA jacks" on the TV but not all. It should be labeled at the connector if it is an output, or just another input. You can always consult the TV manual to be sure.

Few things you can do to test
  • Does your TV have a "headphone jack", use the adapter (2 RCA female - 3.5mm connector) to plug into the headphone jack and see if there is sound
  • Connect the Black and Red RCAs from the headphones directly to the another output, like a DVD player, CD Player etc....

I hope this helps,
Magoo

Mar 10, 2011 | Sennheiser RS 110 Consumer Headphones

1 Answer

My connector is frozen on blinking red and blue. It will not connect with the head phones and go solid blue.
Have you tried doing the same with the headphones? If you hold the power button down on both the transmitter and heaphones (get them both flashing red and blue), they might pair.

Jul 15, 2010 | Logitech FreePulse Wireless Consumer...

2 Answers

My Freepulse headphone won't pair anymore. Both components charge, both both of them display the red LED light. I've tried the override button on the transmitter, and I've tried holding the power button...
You hold the button on the transmitter for about 50 seconds - light flashes red, solid red, goes off and then flashes blue and red. Then you can do the same on the headphones. Then wait and they should pair.

Jun 29, 2010 | Logitech FreePulse Wireless Consumer...

4 Answers

Just bought the brookstone wireless tv headphones. I have a Westinghouse 40 inch lcd tv. I plugged in the rca red/white into the audio out and I don't get any sound into the headphones?
I had the same problem with Brookstone wireless headset the only solution I found was plug in the red and white connectors to your cable box it works perfectly that way. Just make sure the red cable connector from the transmitter is connected to right red input connector on the box. I have a Comcast cable box. Now I need a solution for them on my PS3?

May 09, 2010 | Brookstone Surround Sound Earbuds...

1 Answer

Just bought the brookstone wireless tv headphones. I have a Westinghouse 40 inch lcd tv. I plugged in the rca red/white into the audio out and I don't get any sound into the headphones?
I had the same problem with Brookstone wireless headset the only solution I found was plug in the red and white connectors to your cable box it works perfectly that way. Just make sure the red cable connector from the transmitter is connected to right red input connector on the box. I have a Comcast cable box. Now I need a solution for them on my PS3?

Mar 17, 2010 | Brookstone Surround Sound Earbuds...

1 Answer

I have a wireless headphones the only number i can see is model f0461b on the trasmitter. The transmitter and headphone are not comunicating the lights are red not blue.How do i recalibrate them so they...
In rare cases, the FreePulse Headphones may loose synchronization with the receiver. If this occurs the following steps will re-establish the connection by putting both the headphones and the receiver in discoverable mode (actively searching for another bluetooth device it can connect to).
Putting the headphones in discoverable mode:
Press and hold the power button (located next to the charging port on the right earpiece) on the headphones. The LED on the button will go through three states in this order:
  • Blinking Red
  • Off (continue to hold. the LED will be off for several seconds)
  • Alternately blinking red and blue. (The headphones are now in discoverable mode and you can release the button at this point. The headphones will remain in this state for 30 seconds).
Putting the receiver in discoverable mode:
Press and hold the power button (located on the side of the receiver opposite the headphone jack).The LED on the button will go through three states in this order:
  • Blinking Red
  • Off (continue to hold. the LED will be off for several seconds)
  • Alternately blinking red and blue. (The reciever is now in discoverable mode and you can release the button at this point. The reciever will remain in this state for 30 seconds).
Re-establishing the connection:
To re-establish the connection between the headphones and the reciever, put the headphones and the receiver in discoverable mode at the same time. It will take a few seconds for the two devices to establish the connection. Once the connection has been established the LEDs on both the headphones and receiver will glow solid blue.

Nov 19, 2008 | Audio Players & Recorders

2 Answers

My logitech headphones dont turn on anymore.
Quote from LOGITECH official site:
In rare cases, the FreePulse Headphones may loose synchronization with the receiver. If this occurs the following steps will re-establish the connection by putting both the headphones and the receiver in discoverable mode (actively searching for another bluetooth device it can connect to).  
Putting the headphones in discoverable mode:
Press and hold the power button (located next to the charging port on the right earpiece) on the headphones. The LED on the button will go through three states in this order:
  • Blinking Red
  • Off (continue to hold. the LED will be off for several seconds)
  • Alternately blinking red and blue. (The headphones are now in discoverable mode and you can release the button at this point. The headphones will remain in this state for 30 seconds).
Putting the receiver in discoverable mode:
Press and hold the power button (located on the side of the receiver opposite the headphone jack).The LED on the button will go through three states in this order:
  • Blinking Red
  • Off (continue to hold. the LED will be off for several seconds)
  • Alternately blinking red and blue. (The reciever is now in discoverable mode and you can release the button at this point. The reciever will remain in this state for 30 seconds).
Re-establishing the connection:
To re-establish the connection between the headphones and the reciever, put the headphones and the receiver in discoverable mode at the same time. It will take a few seconds for the two devices to establish the connection. Once the connection has been established the LEDs on both the headphones and receiver will glow solid blue.

Do this and Freepulse will be pleased.

Aug 15, 2008 | Logitech FreePulse Wireless Consumer...

1 Answer

Defect headset
hold the transmitter button for about 50sec until it flashes blue/red quickly and connect the headset afterwards. Hope that helps. God bless.

May 30, 2008 | Logitech FreePulse Wireless Consumer...

1 Answer

Free Pulse
The following procedure will re-establish the communication link between the Headphones and the Wireless adapter, this is called "pairing". Before you start please make sure both the headphones and the wireless adapter are fully charged and turned off.
Note: The headphones and the wireless adapter come pre-paired from the factory.
1. Press and hold the power button on the headphones. See Figure 1.
headphone.jpg
Figure 1

2. Continue to hold the button down until the LED starts flashing red/blue in an alternating pattern. Release the button when the LED starts flashing red/blue. See Figure 2.
headphone-flash.gif
Figure 2
3. Once the headphones LED is flashing red/blue, press and hold the power button on the wireless adapter. See Figure 3.
receiver.jpg
Figure 3
4. Hold down the button until the LED starts flashing red/blue in an alternating patter. The LED will blink blue, then turn off for a few seconds then blink red/blue. Release the button when the LED starts flashing red/blue. See Figure 4.
receiver-flash.gif
Figure 4
5. Once both the headphones LED and the adapter LED is blinking red/blue, press the volume up button once on the headphones. See Figure 5.
headphone-volumeup.jpg
Figure 5
Once the headphones is paired with the adapter, the LED on the headphones will blink blue once every two seconds. See Figure 6.
headphone-flash2.gif
Figure 6
When the adapter is paired the LED will be solid blue. See Figure 7.
receiversolid.jpg
Figure 7
The adapter may continue to blink red/blue for a few seconds even after the headphones LED starting blinking blue. This is normal; the adapter may take a few additional seconds before the LED turn solid blue.
Once the headphones and the adapter are paired, it is not necessary to pair them again even if the batteries on both units are completely drained.
Additional Note: Repeated pairing will not improve the sound quality or give the headphones and the adapter a cleaner connection.

Mar 11, 2008 | Logitech FreePulse Wireless Consumer...

Not finding what you are looking for?

View Most Popular

FreePulse Wireless Consumer Headphones

  • Audio Players & Recorders

Related Question

Sylvania wireless headphones

  • Sylvania SYL-WH930GB Wireless Headphones

Open Questions:

0 Answers

How to Replace the Battery on a Logitech Freepulse transmitter

Jul 29, 2014 | Logitech FreePulse Wireless Consumer...

0 Answers

Where to buy replacement foam cushions for Logitech freepulse

Aug 03, 2013 | Logitech FreePulse Wireless Consumer...

0 Answers

where can I find replacement foam earpads for logitech freepulse headphones

Jan 23, 2012 | Logitech FreePulse Wireless Consumer...

0 Answers

My Logitech FreePulse headphones won't pair with my Windows 7 laptop. It says no driver is available. Is this right?

Sep 12, 2010 | Logitech FreePulse Wireless Consumer...

Related Topics

Logitech FreePulse Wireless Consumer Headphones Logo

1,077 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Logitech Z-5450 Computer...

Logitech X-530 Computer...

Logitech Bluetooth Wireless...

Logitech X-530 Computer...

Logitech X-540 Computer...

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top Logitech Audio Players & Recorders Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18596 Answers

Vernon Taylor

Level 3 Expert

7446 Answers

Are you a Logitech Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...