Canon ip4500 problematic with win 64bit - seeking solution

Canon Printer Error 5200 may occur if the ink level in your printer is low or if you have a defective ink cartridge. Follow the steps to fix Canon printer 5200 Error code:

·Refill your cartridges/Ink tank
·Clean printer cartridge
·Factory reset printer

Find here the more canon printer error codes and their solutions.

i have a canon ip4500 was error5200

Here ya go: http://en.allexperts.com/q/Printer-mechanical-problems-1024/f/Canon-iP6600D-Error-Code.htm

Canon printer error code 5200 is a technological malfunction that stops printing of a canon printer. The error is registered on the screen when the temperature of the ink cartridge is high. There are no concentrations of ink present on the ink cartridges. The print head of the printer is also heated by a temperature rise resulting in an error code of 5200. Canon Printer Error 5200 Few troubleshooting steps are explained below. These troubleshooting steps are so basic that they can be performed by anybody with enough guidance. But if, in any case, someone is unable to comprehend these troubleshooting acts, assistance from trained experts is needed.

Canon printer error code 5200 is largely due to cartridge problems. This can be due to a low amount of ink in your cartridge, a faulty cartridge, or maybe there are some flaws with the logic board of your printer. We realize that Canon printers are designed to be printed in black, even if the Black cartridge is empty, using colors in the ink cartridge. Thus, if you see a mistake of 5200 in the Canon printer, the printer cartridges are either empty or near to empty. Now that you know the root of the error, let's talk about the solutions.

Our Services: You may find that the Canon printer error code 5200 has been deleted after the above information has been completed. But if you still get the same error code on your computer screen when printing, you can contact Our Printer Error Specialist now.

Check given blog.

TRY

• ERROR LCD: Error Code 5200
• ERROR: Error code 5200 appears on the computer screen
• ERROR LCD: Error code (5xxx through 9xxx) appears on the display

Error 5200 is a printhead temperature error, sounds like you need a new printhead. The part number is printed on the side of the printhead. it's a QY6 number

it sounds like you purchased a faulty cartridge. A very common problem, unfortunately. Try a new cartridge. I hope this helps

Hi You can Try
Another old posting
Error Code 5100
Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.

All The Best: Pineworks

canon pixma 4500 service error 6502

me too