WIPRO LQ54 DX unable to print any document.test print is ok

Get in touch by calling wipro printer customer support number 1-800-204-4427

Dynex has the documentation for the DX-32L221A12 on the product site: http://www.dynexproducts.com/products/televisions/DX-32L221A12.html?supportTab=open . The direct link to the User Manual in English is http://www.dynexproducts.com/cms/documents/Manuals/DX-32L221A12-DX-40L260A12_11-0101_WEB_ENG_V1_Final%20lr.pdf . Since this is a PDF you will need Adobe Reader to access the file. Once in Adobe Reader you can print the document to any printer connected to your computer. If you can't print the document, you can put the file on external media (flash drive or optical media) and have it printed at your local print shop.

I hope this helps.

Cindy Wells

Thanks for posting to Fixya and it is my pleasure to guide you.

Since you have been able to print test copies, that tells you that your printer is working.

Questions:
1. Did you print the test from the front of the printer, from the control panel or from a document?
a. If you printed from the printer then
b. test print from the control panel Printers & Faxes then
c. from a document.

1.a. From control panel, double click on Printers & Faxes. Click on the printer that has a check mark, indicates your primary printer, and right click and properties. Click the Print Test page at the bottom. If you get a test page then goto

1.b. Open Word and type the phrase "Test Print" in the document. Click File and Print. Look at the top of the dialog under Printer. You should see your printer name. If not, click to arrow at the right and pick you printer name from the list. Then click OK to send the document to the printer. If you get the page to print then you are done. You should be able to print from any source.

4. If that did not solve the problem then be sure to write down any errors or numbers and post back.

Good luck and please post back that you are successful and click thumbs up of your success or that I can be more helpful.

Good luck and please post back that you are successful and click thumbs up of your success or that I can be more helpful.

Go here:
http://dynexproducts.com/cms/documents/DX-32E150A11_10-1312_WEB_ENG_V3_Final_lr.pdf
Make sure you have a .pdf reader, such as adobe reader so you can view the document.
Then just print it when it opens up.

Open PDF-->file-->properties--> security tab

Check if printing is allowed

If it is not, you will not be able to print

A system has 100 watt of signal power going in to the channel with noise of 10 watt. In order to send 10,000 bits/sec. How much bandwidth is needed.

Use this method:

[File]
[Print]
Select the printer from the list and click on [Properties]
Change the "Original siae" to "11x17"
Change the Output size from "Same..." to "8.5x11" or "8.5x14"
[OK]
[OK]

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00738923&lc=en&dlc=en&cc=us&product=468827&rule=20960&lang=en

follow this document and ur problem will be resolved

I want to install dot matrix wipro lx 540 printer's drivers..
but windows unable to detect plug and play priner..
where does I can find the drivers?