I need to project the image in the exact ratio of 4:3, this is not happening height-wise the projected image is slighlty longer than it should be which is strange because the content of the image is stretched horizontally. ive gone through all of the options on the menu and cant figure it out. ive been using dvd with component video connection
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure that the screen is the correct aspect ratio for the most commonly used projection device. For instance, a video projector should be in 4:3 or 16:9 modes, depending on its native aspect ratio. The screen should match the aspect ratio that is used most often. This will allow the entire screen-viewing area to be filled by the projected image.
Sounds as though you have the set in zoom format. Check your remote for a screen format button and switch it to wide or normal format. This button may also be labeled as "Aspect" for aspect ratio which is the ratio of of width to height. Older sets had a ratio of 4:3 and the new wide screen sets are 16:9. In zoom format the pic. is expanded and pushes some of the pic. off the screen display area.