Question about Polaroid 1720-7 Remote Control
Hello, I bought my elderly parents a Polaroid TV, (20")? or so with a DVD and VCR combo built in. Model# TBX2000AF Chassey# CN12DVR Anyway, my father seems to have dropped the remote too many times on the tile floor and needless to say it doesn't work anymore. I tried buying a Phillips Universal remote, but there is no code for the "trio", just TV or DVD/VCR machine separately. After calling Phillips they told me what I already found out in their instructions that their remote would not work on the Polaroid TV/DVD/VCR and I have had no luck getting hold of Polaroid. Before I buy multiple remotes and spend a lot of time on this, might you know what kind of universal remote will work on this TV? I hope you can help me, and if not I thank you for your time and consideration. If you could respond to the [email protected] address as well as this one, [email protected] I would appreciate it. Tracy
I also have a Polaroid. I used my Direct TV remote and went under Mitsubishi and searched codes. I channeled up until my TV powered off. I then hit the Select button. Then I tried to power the TV on with the Direct TV remote and it worked. So, maybe it will work for everyone's. Good luck.
Posted on Oct 28, 2007
Have you tried "One for All" universal remotes?
Posted on Jun 10, 2007
Tips for a great answer:
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a
Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Repeat steps 1 through 5 for each device you want to control
Aug 24, 2011 | One For All URC-3021 Remote Control
Dec 03, 2017 | Magnavox NE206UD TV/VCR/DVD Combo Remote...
Mar 11, 2010 | Polaroid TBX-2000AF 20 in. TV/VCR/DVD...
Nov 22, 2007 | Polaroid FLM-3232 Television
May 31, 2007 | Sansui TDC2075 20 in. TV/VCR/DVD Combo
499 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: