Question about Dryers

1 Answer

A section of the lights are out on my Xmas tree. I've searched each light that's off but can't find anything

Posted by Roxanne Hall on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 19 Answers

You need to find a shop that sells spare Xmas light bulbs and try swapping out the ones not lit. take pic of your Xmas light and or one of your bulbs and bring it to retailer or search online

Posted on Dec 06, 2012


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need instruction on 3 part tree w/ lots of plugs

The plugs and sockets should be marked A, B and C. Extra sockets should be blanked off. Start with the bottom section and plug it in. Find the plug on the second section and plug it into the socket on the bottom section. Put the top section in and put the plug on that into the socket on the middle section. Historically, lights never work! We had one with 600 lights, and they gave us about a 100 spare. Finding the ones that were out was a bit of a nightmare. After 6 years, we bought a newer smaller tree with LED lights.

Dec 09, 2015 | Cars & Trucks

1 Answer

How do you assemble the lights on a pre lit Xmas tree? The bottom part is lit as it plugs into the transformer but the top part won't light as the 2 connections I have don't fit into each other an...

first how long have you had this tree?, second , if it is new i would take it back to where i bought it and ask them for a new one, third, make sure that the parts you have are in their correct place, this might have been the problem

Nov 28, 2011 | Home

1 Answer

LR-4 If I hit a bump the dash lights up like a xmas tree with errors. Thinking a loose connection to the PCM. Where is it ?

Behind the battery. You will have to remove the battery to access it. Can you identify what lights are coming up and what messages are shown on the instrument cluster? The messages can help you narrow the search without the correct diagnostic equipment.

Dec 26, 2010 | 2010 Land Rover LR4

2 Answers

I lost the instructions to my 9 ft GE Trim-a-tree TD I am not sure if I missed a plug or if I have a bulb burned out. I have 1/2 a branch in the middle of the tree not lit and 1/2 a branch on the other...

same problem but many more lights involved. buy the $20 product called "light keeper pro" and follow the instructions. this device fixes this problem by either flashing a charge through the burned out section to 'heal' a failed shunt. if that doesn't work you can trace the current with the device to find where it is interrupted. the device chirps when it senses the 60 cycle hum of the a.c. current. replace buned out lights as soon as you find them as they cause an overload in the remaining lights in that circuit.

Dec 21, 2009 | Uniden Cordless Phone

1 Answer

How to connect the lights on a 3 section pre lit christmas tree

Did you plug one section of the tree back into itself?

Dec 06, 2009 | Electrical Supplies

2 Answers

We purchased an Everstar pre-lit Christmas Tree and we can not locate the manual or instructions that came with the tree any help since half the tree doesn't light up and all the plugs are plugged in....

I have a 3 piece Everstar 7/12 slim pine and here are the plug portion of the assemblly instructions . "1) connect the plug(A1) of string with the end cord (B1) of string. 2) Insert the plug (B2 & C1) of string into the wall outlet. 3) After the plugs are plugged into the wall outlet your entire tree should be lit. If some bulbs do not light, search for any loose plugs, broken, loose or missing bulbs that may have caused the problem."
My illustration shows the A1 in the top section of the tree while B1 is in the middle section. Both the middle section and bottom section get plugged into the wall or extension cord. Hope this helps

Nov 28, 2009 | Solar Christmas Tree 6 Outlet Foot Switch...

1 Answer

Keypad not responsive; lights blink- no joy!

First things first... please follow this link to see if your machine is part of Maytag's recall... or this site for details on the recall...

Aug 18, 2007 | Maytag Neptune MAH9700 Front Load Washer

Not finding what you are looking for?
Dryers Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts


Level 3 Expert

85239 Answers


Level 3 Expert

4369 Answers

Brad Brown

Level 3 Expert

18360 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides