Low volume on headset - Avaya 9608

Ensure sound on headset and on phone are increased. Some phones allow you to control volume on headset so setting to low on one while high on the other may offer poor experience.

Mark
Motorola Support

Adjust volume both on phone and headset. Sometimes the phone limits headset controls.

Mark
Motorola Support

press the two buttons on upper and lower side while it is connected to your phone

Please see the link below for the User's Guide.

• Headset is muted. Long press (3 sec.) the volume down button on headset to unmute the microphone. See page 16.
• Improper positioning of voice tube. Try various other positions.
• Voice tube may be clogged. Remove voice tube and test to see if callers can hear you without it. If they can, then replace the clogged voice tube. See page 18.
• Speaking volume is too low. Increase the speaking volume by
adjusting the speaking volume minor adjust buttons on the base unit as described on page 16. If the volume is still too low, select another speaking volume major adjust setting as described on page 16.
• Incorrect configuration dial setting for your phone. Try other
phone configuration dial settings on the base unit. Ensure the
selected number is in line with the position indicator. See page 14.

Plantronics CS70 User's Guide

Good luck from Headsets Direct!

Yes, there is a way to adjust the volume on your Discovery 925 headset. See page iv to locate volume control button and page 8 for the instructions in this link for the Plantronics Discovery 925 User's Guide.

Good luck from Headsets Direct!

it should have a volume control on the headset to turn it up

Some devices could be defective but the odds with Jabra along defectiveness are in 1/900!

Try to increase the volume from your phone! if that doesn't work... the product could be defective!

What cellular device do you carry!?

check your headset if it's original or test it with other headset.

volume is too low and I can make calls the incoming calls are only thru phone

The head set just started to have low audio. People can hear what I am saying. I can't hear them.

How do I fix it?