Calendar i can't figure out how to set the calendar

Basics of the Samsung Galaxy S 5's Calendar Display ...

www.dummies.com/.../basics-of-the-samsung-galaxy-s-5s-calendar-displ...

If you don't have a lot of events on your calendar, using the monthly display is probably ... If you prefer the week to start on Saturday or Monday, you can change it here. ... you can have the phone alert you with a pop-up, signal a notification on the ...and manage digital media, and make the most of your iPod and cell phone.

Display Options for the Galaxy S 4 Calendar - For Dummies

www.dummies.com/.../display-options-for-the-galaxy-s-4-calendar.html

In addition to the default display option for the Galaxy S 4 Calendar, you can set other personal preferences, shown in this figure, for the calendar on your phone. ... View Styles: If you are not crazy about the way the monthly or weekly calendar appear, ...However, you can only change settings on the account, like the sync ...

Calendar app - date always 31 - Android Forums at AndroidCentral.com

forums.androidcentral.com > ... > Samsung Galaxy S4

Have you sync'd any calendars in Settings/Accounts? Press on the account and make sure you have Calendars checked.

Did you figure this out? I can set it but, the battery backup (wherever that is) doesn't hold the time the next time I plug it in. The instructions aren't clear.

Below are the steps to assist you in
setting the Date and Time on your calculator.

NOTE: The "Time Set", "AM/PM", "12/24" and "Format" associated keys are
on the faceplate above the respective key. Position the calculator so
that you can look directly over the keypad to see the notations.

Setting the date:

1. Press the CALENDAR/CLOCK Key. The default date will appear.

2. Hold the TIME SET key down for 3 seconds or until you see the first
digit begin to blink in the display.

3. Input the correct date.

4. Firmly press and release the TIME SET key. The first digit should
stop blinking and the date is then set.

Setting the time:

1. Press the CALENDAR/CLOCK key. The default time will appear.

2. Hold the TIME SET key down for 3 seconds or until you see the first
digit begin to blink in the display.

NOTE: The seconds will disappear.

3. Input the correct time. If you need to adjust to AM or PM, press
the AM/PM accordingly.

4. Firmly press and release the TIME SET key. The first digit should
stop blinking and the time is then set. The seconds will again be
displayed.

Follow by pressing the CLEAR key to return to the calculator mode. To
return to either the TIME or DATE, press the CALENDAR/CLOCK key to
toggle between them.

OK, I bought one over the weekend just for chuckles. I figured it out.
On the top of the calculator there is a key that shows a little clock. Punch it once and the date appears...like 01-01-2000 or somesuch. Press it again and the time shows up..

Hold the time set key (=) down for a second until the first zero starts to flash. All you have to do is start punching in the time. When you are done press the time set key again. Voila!

Punch the key with the little clock again and the date shows up. Hold down the time set key for a second like explained above until it starts flashing. Enter the date with the key pad numbers. Done!

I couldn't figure this out either till I looked above each key (didn't notice what it said). Anyway, look real close.

Hope it works out for all and everyone finds this solution...

CMHIMG

Program the VCR as if it were 1998. The day date sequence is the same as 2009 (and not a leap year).

This should solve the problem

CLOCK & CALENDAR FUNCTION

Look for the key with the cal/clock pic on it. Use to switch between calendar or clock mode. It is next to the feed key.
(12/24) Key used to switch between 12 or 24 hour at clock mode.
(Time Set) Key used to set the date and time in calendar & clock mode.
(AM/PM) Key used to switch between AM or PM at clock mode time setting.
(Format) Key used to select date format between "YYYY/MM/DD",
"DD/MM/YYYY" or "MM/DD/YYYY" at calendar mode.
Hope this helps, play with it I figured it out with instruction sheet.

This modle watch use Japan Citizen movement, the calender need to be reset at begining of every month, or else it will go to 32, 33.....40, and 00.

Tsai

you need to run a inbox repair tool.

Make sure you close outlook

Start > My computer > Tools > Folder options > General tab click on show hidden files and folders > Apply ok

Go to the follow wing location to find scanpst.exe
if you are using Outlook 2007
C:\Program Files\Microsoft Office\Office12
If you using Outlook 2003
C:\Program Files\Microsoft Office\Office11

Double click on SCANPST.EXE
Click on browse go to following locaiton where your pst file as been save
C:\Documents and Settings\Robyn M. Drothler\Local Settings\Application Data\Microsoft\Outlook\outlook.pst

Click on start > then click on repair

Updated Instructions Simple fix for a corrupted Date Book sync error (at least it worked for me on my Treo 650). 1). Turn off 'Show Calendar Event' in the Phones 'Options - General Preferences' menu. 2). Turn off phone. 3). Set the Date/Time to the maximum limits (12/31/31) in Preferences. 4). Open the Calendar and view the maximum day 12/31/31. 5). Select 'Purge - (Delete events older then 1 week)' in the Calendars Options menu. 6). Reset the Date/Time to the current day in Preferences. 7). Hotsync (Desktop Calendar overwrites handheld). 8). Hotsync again to make sure you don’t get the error (Synchronize the files). That’s it. =============================== Outlook Calendar The attempt to open the database failed. Date Book application database is not found. Please invoke the Date Book application on the handheld once and re-synchronize. OLERR:05-0001 OLERR:0D-0004 OLERR:0D-0001 - Not Synchronized Outlook Calendar synchronization failed OLERR:15-0002 OLERR:06-0001 ===============================