- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hitachi washer error code c3
Hitachi SF-140SV washer error code Error code
Description
C3
The tub does not spin
C4
C8
The lid cannot be locked
C9
The lid lock cannot be released
https://washingcodes.com/hitachi-washer-error-code/
If your Nokia C3 displays code error while entering the unlock code,the code is wrong.So don't enter the unlock code again .Because Nokia has 5 unlocking tries only.If you used those tries you cannot enter the unlock code.Because it get hard locked.So i would suggest the site Simpleunlocking.com get the unlock code at low cost for Nokia C3 and unlock it.(If you have remaining tries get unlock code here). After getting the code get free unlocking instructions from the site Mobileunlockguide.com and unlock it step by step.
Hello there, This means your water sensor has detected a leak. it will stop when the sensor is dry. Try getting the water out of the trap door and letting the machine dry.
I would also unplug it for secirity reasons.
Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.
Hello, This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry. Try getting the water out of the trap door and letting the machine dry.
I would also unplug it for secirity reasons.
Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.
c3 means that the temperature of the water inside the tank is higher than 60 degrees celcious.may be you have already connect the dishwasher with to much hot water or the rele inside the pcb is stuck.
waiting for answer
If you open a sidepanel and look at the bottom of the machine you see a brown device with a piece of white foam,this is the leak prevention system.
Push foam down and the error code should be cleared.
Make sure you there's no water left on the bottom of machine
×