Regarding LCD Dear Sirs/Madam I am having Fuji F10 camera. Unfortunatey it fell on the ground and the LCD is broken from one corner. So Please help me by letting me know that, is the broken LCD repairable? or if it is to be replaced then what is the cost of the LCD?. Please give me the right advice. Thanks Hiroito

Do not know if you still need it. If you still need it, I will send it to you via your email

Is there a mode to use the built in memory vs. the memory card? And, you're using up the built in memory and not using the card? That's the way my kodak is, anyway. And, also my Sony Cyber shot.

Hello. No problem. Just go to the link I am including herein and order the part directly from Fuji: http://www.fujifilmusa.com/support/ServiceSupportParts.do
Regards, Joe
PS please rate my answer. Thank you and happy holidays.

Hi I am vortash .. check for damage on your download lead and around the camera plug interface .. check that the drivers are still installed and reinstall them to make sure ... if you have a sd card installed remove it as it may be lose in the socket and the camera is trying to read it and can't .. check your batteries are ok .. try it on another computer .. if all this fails sounds like the camera interface has broken constant plugging in and out can sometimes cause problems with a loose plug .. hope tthis helps Regards Vortash

That screen is the lcd screen (liquid crystal display)
I had a fuji E900 that was dropped when the lens was extended , and it broke the lens mount ring inside the camera.
I took the camera apart to try and repaair it.
as part of the dissasembly I removed the lcd .
If you can find a parts camera.with a good lcd, it is worth the effort to simply replace your lcd.
if you need mor info email me , and I will try to describe the dissasenbly sequence for the fuji that I had, perhaps it will be the same for your camera.
Tom

There was a recall (free repair) for the Finepix S5000 from Fuji.
It affected the ccd-sensor of many cameras.
It does depend on the serial number of your camera.
Email them and give them your camera details.
You might get it repaired.
They do not sell any ! spares .

Try them

Dear schmex,
It sounds like you have a broken LCD screen this shouldn't effect the image quality, but it might get worse over time and it will probably make it more difficult to compose the picture.

Sincerely,
Agent Allan
Go Ahead. Use Us.

Hello, I have a similar camera with a broken zoom - would you be prepared to sell yours for spares? Thanks Steve

Hello, I have same problem with dsc-t10, when I open my camera than I found 3 motors, two of them on the right of the lens, these are to adjust the focus. One of them was broken.

This indicates the back light has blown. The whole screen will need replacement- if the part is available -of that I cannot advise you, The repair costs in a work shop will outstrip the value of the camera, that is alomost certain