Question about Kenmore 62622 Microwave Oven
Microwave not heating ..loud noise on both low and high power. Took front off and made sure all connections were on...
Dis-assemble waveguide and clean thoroughly. try again. if no-go then failed magnetron. get new unit.
Posted on Jun 08, 2007
Apr 14, 2013 | Kenmore 62622 Microwave Oven
Jun 07, 2011 | Kenmore 62622 Microwave Oven
Feb 11, 2011 | Kenmore 62622 Microwave Oven
Feb 09, 2011 | Kenmore 62622 Microwave Oven
Dec 11, 2009 | Kenmore 62622 Microwave Oven
Nov 22, 2007 | Kenmore 62622 Microwave Oven
Nov 19, 2007 | Kenmore 62622 Microwave Oven
The problem is likely on the control panel, which we repair nationwide for $39.95 postpaid.
This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.
This often can affect the exhaust fan operation, too. The lights and fan can be inopoerable or stuck on.
If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and
disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk
Oct 13, 2007 | Kenmore 62622 Microwave Oven
Mar 21, 2007 | Kenmore 62622 Microwave Oven
Mar 20, 2007 | Kenmore 62622 Microwave Oven
Dec 17, 2014 | Kenmore 62622 Microwave Oven
Jun 16, 2014 | Kenmore 62622 Microwave Oven
Jun 14, 2014 | Kenmore 62622 Microwave Oven
346 people viewed this question
Usually answered in minutes!
×