Question about Fuji FinePix S5000 Digital Camera

2 Answers

Fuji FinePix S5000 stuck in date/Time mode

Camera powes on and display says to set date and time. None of the buttons respond, Can't do anything with it.

Posted by Dave Adams on

  • Anonymous Mar 19, 2009

    Hi. I've got the same problem with my fuji finepix S5500. It's 4 yrs old, and has recently been dropped. I can't set the time because it'll not respond to any buttons. When powered up it says: Date/Time not set. I was guessing that one button was stuck, but none of them seems to be stuck, and I think it would continiously beep than.
    It's been dropped earlier too, and we had no problems. I'll try to find out where the battery is at, and try to replace it. If you have any other ideas what might went wrong please let me know at dibloff at yahoo dot com. Thank you.

×

Ad

2 Answers

paulus649

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 72 Answers

All you have to do is undo the back, and replace Lithium battery and it should work. You will need a service manual just email me at [email protected], i will email you one

Posted on Nov 14, 2011

Ad

zdenek vajdak

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 206 Answers

Set date and time and camera should work. If camera asks to have date set everytime you take batteries out then the memory 3 volt battery is flat ... replace.

Posted on Sep 03, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the date stamp from all my holiday pictures taken with my DMC-SZ3


The date display option can come from your camera or the software programme you use to view. Start with the software and disable the date & time display function. If this doesn't work then go into the camera menu and in the display setting change the date & time to either disable or none.

Oct 01, 2014 | Panasonic Lumix DMC-SZ3 Digital Camera...

1 Answer

Camera broke


your camera is broken. get a new one. they do wear out, you know. if it is new, return it to the store with the receipt, and get your money back.

Mar 08, 2018 | Kodak Easyshare CD82 Digital Camera

1 Answer

How to reset coolpix p90


To reset the camera remove the battery for 15mins, replace the battery. power up the camera and go to the camera's Menu and set the Date & Time.

Apr 17, 2013 | Nikon COOLPIX P90 Digital Camera

1 Answer

Forgot to set time and date when i turned camera on


Hello and Welcome to FixYa!

If you have forgotten to set date and time then you can also set date and time after turned on the camera. to set date and time follow the given instructions:
  • Press the Menu button on the rear of the device, then choose Set with left or right button, Then go to Setup menu.
  • Select Option followed by time icon. This brings up the date display. The display blinks as it has not yet been set.
  • With the help of Right or left buttons select Year, Month, Day,Hour or Minute. Then press Menu/Ok button after the settings completed. Now every picture captured with the Fujifilm FinePix F460 will save the date and time to the pictures
I hope this solution helps you
For further assistance, I am here to help.
Thanks and Keep Visiting FixYa

Jul 12, 2011 | Fuji FinePix F460 Digital Camera

1 Answer

How do i change the date stamp on my camera? Kodak Easy Share m1093


  • Turn the Kodak's dial to "Capture" mode. This brings up the camera display. Press the "Program" button behind the dial.

  • 2

    Press the "Down" button until "Date Stamp" is highlighted. Press the "OK" or "Set" button to access the date-stamp menu.

  • 3

    Press the "Down" button to change the selection to "None." This removes the date stamp.

  • 4

    Press "OK" to save the setting. Press "Program" to return to capture mode.


  • Oct 01, 2010 | Kodak EASYSHARE M1063 Digital Camera

    1 Answer

    Says date/time not set but wont let me set the time or date!


    Broken keypad ribbon. It's because the keypad ribbon is folded over twice and the creases split over time. have a look at my tips page for this problem. It won't help you much I know and the only solution is a replacement membrane.

    May 04, 2010 | Fuji FinePix F470 Digital Camera

    1 Answer

    Cannot set the Time/Date


    Setting the Date and Time The date/time needs to be set if/when: Camera is turned on for the first time. Camera is turned on after leaving ViviCam X60 without the battery for an extended period of time. When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time. 1. Slide the mode switch to [replay ], and press the MENU button. 2. Select [Setup2] with the LEFT ARROW button. 3. Select [Date/Time] with the UP ARROW / DOWN ARROW buttons, and press the SET button. The Date/Time setting screen will be displayed:[Setup] [Format], [On/Off]. 4. Select [Setup] with UP ARROW / DOWN ARROW buttons,and press the SET button. Select the item’s field with theLEFT ARROW / RIGHT ARROW buttons and adjust the value for the date and time with the UP ARROW / DOWN ARROW buttons. The date and time is displayed as the format you set. The time is displayed in 24-hour format. After confirming all settings are correct, press the SET button. The setting will be stored and the screen will return to the Setup2 menu.

    Jul 05, 2008 | Cameras

    1 Answer

    Display date & time on developed pictures


    When you say it's displayed on the screen, do you mean while it's in playback mode, it's embedded there?

    If not, you will have to put your resoltion in postcard mode and make sure in menu that your date or date/time stamp is turned on.

    To get to your resolution settings, turn camera on to shooting mode, hit function/set button and arrow down to the bottom left corner where it will show your resolution (L,M,S, etc) and this is where you will find postcard mode.

    This setting is the only one you can use date time stamp and will show up in prints, but only good for 4 x 6 prints, anything larger will not be good resolution, it will be pixelated because it's only enough quality for a small print.

    Hope this helps!

    Mar 12, 2008 | Canon PowerShot A460 Digital Camera

    1 Answer

    Adjust the date on the i70


    Hey Mat,

    You can find your product manual here:

    http://www.samsungcamera.com/popup/download.asp?prol_uid=4148&prj_uid=733

    You'll find once you download the manual's pdf, it'll be on page 20 of the pdf manual. The sample is below, but it's much clearer on the pdf manual. Best of Luck!

    When Using the Camera for the First Time : Setting up the Date / Time and Language
    When the camera is turned on for the first time, a menu will be displayed
    in the LCD monitor to set date, time and language. This menu will not be
    displayed again after setting up the date, time and language. Set up the
    date, time and language before using this camera.
    ■ Setting up the language
    1. Press the [Language] menu button.
    2. Select a desired language by pressing the
    vertical smart button.
    ■ Setting up the date, time and date type
    1. Press the [Date & Time] menu button.
    2. Select a desired date type by pressing the
    vertical smart button.
    3. To change the date, select the [2008/01/01]
    menu and press the vertical smart button.
    4. To select Year / Month / Day and Hour :
    Minute, press the horizontal smart button.
    To change the numbers, press the vertical
    smart button.London
    ● You can select any one of 22 languages. These are listed below :
    - English, Korean, French, German, Spanish, Italian, S.Chinese,
    T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
    Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic,
    Polish, Hungarian, Czech and Turkish.
    ● Even if the camera is restarted, the language setting will be
    maintained.

    Jan 07, 2008 | Samsung i70 Digital Camera

    1 Answer

    Camera stuck at power on - says set date/time, but buttons don't respond.


    This is a firmware failure. Fuji Technical Support need to know about this. a replacement may be possible.

    Apr 24, 2007 | Fuji FinePix S3000 Digital Camera

    Not finding what you are looking for?
    Fuji FinePix S5000 Digital Camera Logo

    Related Topics:

    546 views

    Ask a Question

    Usually answered in minutes!

    Top Fuji Cameras Experts

    Steven Wander
    Steven Wander

    Level 3 Expert

    595 Answers

    Brad Brown

    Level 3 Expert

    18666 Answers

    Rob Hill
    Rob Hill

    Level 3 Expert

    1426 Answers

    Are you a Fuji Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...