Cabrio, power button works, can change settings, but start button wont work
What is the model number of your unit?
WED6200SW1 is the model # i think
the lights all work on the panel, power button, setttings but the start button flashes but wont engage
Replace the thermal fuse on the back of the machine. Here is the part to order.http://bit.ly/Sjdv9E
I had this exact same issue and I just replaced the sensor/thermal fuse and it still will not start. I have power and all the functions work but the dryer will not start.
×
SOURCE: whirlpool cabrio steam electric dryer has sensor light on and does not work
have a problem with my cabrio dryer its powered on but when i push start the sense like comes on and does nother whats the problem
SOURCE: My Dryer will only work if I hold start button, when I release start button the dryer stops.
Anra, this is a classic symptom of a failed even heat board. I've seen a lot of these failures out there. Easy to change out. Check out this link. Catriver..post back http://www.repairclinic.com/0080.asp
SOURCE: NEW Electric Whirlpool Cabrio Steam Dryer; NO HEAT
Check temperature sensor. Check to see if heating element is OK.
SOURCE: I have a cabrio dryer and it will not start. It
control panel is bad, use your warranty and get it fixed for free since it is only 2 weeks old
4,562 views
Usually answered in minutes!
×