Question about Lenovo IdeaPad S10-1211U Netbook

1 Answer

Loveno S10-2 - No bootable device found

When I try and start my Loveno Ideapad S10-2 I get the following message: Realtek PCI Express Fast Ethernet Controller Series v1.17 (030506) PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting pXE ROM. No bootable device -- insert boot disk and press any key I also tried going into the Setup Utility (F2) and it shows: Hard disk 1: None Hard disk 2: None I went to the Boot tab and changed the boot to USB CDROM : Optiarc DVD RW AD-7580S (DVD - Boot Disk) It kept telling me No harddisk found

Posted by cj4par on

Ad

1 Answer

Justin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lenovo Master
  • 2,072 Answers

Make sure your hard drive has higher priority in the boot options in BIOS. If it still doesn't boot then you will need to replace your hard drive. If it shows no hard drive in BIOS then the drive is most certainly bad and needs to be replaced.

Posted on Dec 02, 2012

Ad

5 Related Answers

Anonymous

  • 23 Answers

SOURCE: computer locks when starting

I cannot be sure, but I think that this problem has something to do with having "boot from network adapter" enabled in your BIOS. If this is not the problem, then it might be another malfunctioning device, in which case, you will want to go into BIOS and disable everything except for what you need to get through the restore process(Disable USB ports, network adapter, PCMCIA card slot, etc.)

Posted on Jul 03, 2009

Ad

Anonymous

  • 162 Answers

SOURCE: Broadcom UNDI PXE-2.1 v11.0.11 Copyright (C)

Hi. I think the problem on this one is its either your Harddrive has already failed or your Optical Drive has a cd inside, so double check your Optical drive if there is a disc inside it. If not this issue is also with the operating system, you can try to restore your system by pressing the One Key recovery(OKR) button found beside the power button which has a logo of an arching arrow, but remember to plugin first the ac adapter on your laptop before pressing the One Key Recovery Button and also do not press the power button to turn on your computer because when you press the OKR button it will automatically turn on your computer and proceed with the recovery process. When it gives you some option you should choose One Key Recovery and then choose System Recovery, then factory default and from there it will guide you to the whole process of recovering your machine. If this doesnt fix the issue you could also try using the Recovery disc to restore your sytem t its original settings just like the OKR. Lastly you can contact the tech support dept. of Lenovo, they are open 24/7 and this the number to contact:
US/Canada: Available 24/7 1-877-4LENOVO (1-877-453-6686)
Australia: Available 24/7 1300-557-073
New Zealand: 9am-9pm Mon-Fri 0800-446-833. Hope this helps

Posted on Jun 03, 2010

elix0411

Jose Cada

  • 3530 Answers

SOURCE: Broadcom UNDI PXE-2.1 v11.0.11 Copyright (C)

change your boot priority. press power button then keep on tapping F1 key until your reached to setup utility. go to boot menu and set your boot priority 1 to your HDD. if compute wasnt able to detect your HDD . then there is a problem wth your HDD, you need to call you manufacturer for HDD replacement if unit is still under warranty

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Posted on Apr 04, 2010

Anonymous

  • 96 Answers

SOURCE: my laptop isnt working.as soon as u turn it on a

It goes to a network boot rather than booting straight to the HDD. restart your computer and press f2 immediatley. you are now on the BIOS page. check if your hard drive is detected and if not call Lenovo to have it replaced/repaired. if it is detected, after the PXE error, your computer should boot up just fine.

Posted on Jun 05, 2010

Rahul C

  • 89 Answers

SOURCE: Windows is working normally and

Hi,
It is your LAN driver which is creating problems.Download and install the necessary drivers for your Broadcom Netlink(if you have been given the "driver disc" with your laptop,use that to re-install the driver).If that doesn't work,I think your Broadcom Netlink is spoilt,get it repaired.
Thanks, C Rahul

Posted on Jul 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, I have a Toshiba L510 and when I turn the on button ON: [Power key-this is the message that comes on after that TOSHIBA-leading innovation sign - Intel UNDI.PXE -2.1 (build 082) Copyright...


probably doing a network boot instead of booting from the harddrive. enter the BIOS make sure the harddrive is detected.Also check the boot configuration and verify if the harddrive is set as the primary or default boot.

Apr 01, 2011 | Toshiba Computers & Internet

1 Answer

I get an error message on startup on my Acer Aspire 5100, it says Realtek RTL8139(x)/8130/810x PCI Fast Ethernet Controller v2.13 (020326) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE...


It is beacuse your Hard drive is not detected on the computer properly.
Try resetting BIOS.
If that doesnt work, Check whether your hard drive is good.

Nov 28, 2010 | Acer Aspire 5100 Notebook

1 Answer

No bootable CD in ATAPI CD-ROM Intel UNDI, PXE-2.0 (BUILT 082) copyrighr (c) 1997-2000 Intel coperation For realtek RTL8139(x)/8130/810x PCI Fast Ethernet Controller v.2 13 (0203326) PXE-EGI: media...


try downloading from here

http://pci-ven.com/driverdetector/realtek/rtl8139realtek/realtek-rtl8139-x-8130-810x-pci-fast-ethernet-controller-v2-17-051202-.html

good luck

Nov 08, 2010 | Acer Aspire 5100 Notebook

2 Answers

Pxe e61 check cable message


"Intel UNDI, PXE-2.1 (build 082)
Copyright (C) 1997-2000 Intel Corporation


For Realtek RTL8101E/8102E PCI-E Ethernet Controller v.105 (071227)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
No bootable device -- insert boot disk and press any key"


sounds like a driver issue try to go to toshiba's website and download the latest drivers for the NIC card.

Nov 02, 2010 | Toshiba Qosmio G15 Notebook

1 Answer

When trying to reboot I'm getting this pxe-e61: media failure


"Intel UNDI, PXE-2.1 (build 082)
Copyright (C) 1997-2000 Intel Corporation


For Realtek RTL8101E/8102E PCI-E Ethernet Controller v.105 (071227)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
No bootable device -- insert boot disk and press any key"


install new NIC drivers from your laptop manufacture's site.

Nov 02, 2010 | Computers & Internet

1 Answer

I have a Satellite 450D-13X laptop. Tonight i switched on and this message keeps rolling what can i do This Product is covered by one or more of the following patents: US5,307,459,US5, 434,872, US5,...


Go into the BIOS and disable the Option: Network Boot ROM. This message will show, because the system is trying to boot from your Ethernet ROM.

Jul 11, 2010 | Computers & Internet

2 Answers

Wile I am trying to boot it up it goes in to a loop


Hello.

That error message usually refers to a hard disk failure. Your hard disk cable could be loose or faulty. Or, your hard drive would need to be replaced.

I'd suggest to check the cable and run your system's hardware diagnostics (often F2 or F12) when your system boots.

Hope this helps.

Nov 26, 2009 | Compaq Presario M2000 Notebook

Not finding what you are looking for?
Lenovo IdeaPad S10-1211U Netbook Logo

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...