Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Loud noise thourghout the cycle

I have a Maytag MAV6200 washer and recentely it has been making loud noises during the entire cycle. It still operates fully, but Im afraid to continue using it because the noise has gotten LOUDER. Last night my wife decided to bear the loud noise and wash a load anyway. She started the cycle and it stopped midway. A few hours later (2am in the morning) it suddenly started again and continued on with the cycle. I dont have enough to buy a new washing machiene and I need to get this fixed. Please help.

Posted by on

  • nick boyd Jun 08, 2007

    Thank you for your responce,
    Im am pretty good at working on things around the house. Is this something an amatauer can preform? If so how do I get to the counter balancing system?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 883 Answers

I would have the counter-balancing system checked for proper motion.

Posted on Jun 08, 2007

  • Marty marty Jun 09, 2007

    yes, remove the back panel. look for either a large weight attached to a cable which is routed through pulleys or look for a sliding weight/spring apparatus. Try to determine if any part of that has jarred loose or slipped off pulleys.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?

How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


Dec 03, 2015 | Washing Machines

1 Answer

I have a Maytag mav6200ww top load washer. Recently, it has quit agitating and making a roaring striping noise. Although it will still spin and drain if set to the spin cycle. If you reach inside and...
Transmission is most likely bad.

Sep 05, 2017 | Maytag MAV6200 Top Load Washer

1 Answer

My GE Harmony Dryer is making a LOUD noise during entire cycle
Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101


yue

Jan 26, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Maytag Washer HAV2558AWW loud noise during spin
May be the bearing in your direct drive shaft. If washer is a belt drive, the belt could be frayed

Nov 17, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Make loud noise during spin cycle
Washer may be out of balance, Move closes around in washer and restart

Oct 24, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Neptune makes loud drums like sound 5 min before it stops.
its probably because of the way the clothes are in it. you have to make sure the clothes arent leaning to one side and that they are evenly set up. otherwise when it goes into the spin cycle itll lean and hit the side of the washers inside and make it shake and do what you said it was doing.

Jun 04, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Loud noise during spin cycle
is it more like a roar or a train going by? if so your rear tub bearing is going out. very expensive have to replace the tub, basket, spinner ring and shaft and seals about 4 hrs for an exprienced tech to do took me 7 hrs to do for the first time. but it will be very close to $1000 to have done not much less to do it yourself.

Mar 09, 2009 | Washing Machines

1 Answer

Maytag Washer HAV2558AWW loud noise during spin cycle
Your maytag is really an amana and the bearings are bad. Yes it does cost a lot. If i were you i would buy another washer. Get a whirlpool. (whirlpool now owns maytag)

Nov 16, 2008 | Maytag Atlantis MAV6000 Top Load Washer

2 Answers

Loud noise during spin cycle
this is my experience repairing the maytag washer Atlantis mav series 9750 aww, I had to replace the spin bearing since it was making a jet engine noise when it was spinning out the water. its not an easy job for my 1st time taking this machine apart, you literally take it all apart to get to this bearing, but now I can show how to do it with pictures making it easier for you to do it. even if you have to replace something other than the spin bearing, this how to tutorial will show you how to get to most of the parts in this machine
tutorial located here tutorial located here https://sites.google.com/site/maytagwasherrepair/maytag-washer-repair

Jan 02, 2007 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

"howling" noise during spin cycle (still there after changing burned off belt)
Travioso, there was two service flashes out on this model concerning the seal and bearing which means they had an issue with this washer. The howling noise you are hearing is the bearing and will need the new designed triple seal and bearing kit. This should be covered under your warranty, I believe it is 5 years. The numbers for the service flashes are TDL-0048A-B. Call Maytag and inquire about these service flashes, these should be covered. Catriver.

Jul 25, 2006 | Maytag SAV5701A Top Load Washer

Not finding what you are looking for?

View Most Popular

Atlantis MAV6000 Top Load Washer

  • Washing Machines

Related Question

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?

  • Washing Machines

Open Questions:

0 Answers

washing machine stops before draining water when I manually put to spin, it is a smell as if something is burning. So something tries to happen, but then stops

Sep 12, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

What makes my maytag washer washes thru all the cycles, what is wrong

Jul 07, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

I have a Duet tumblefresh 4.0cuft W10284544A. The inlet pump was leaking so I fixed that and now the washer won't co into the spin after the rinse cycle. The washer drains completely after the wash cycle but when the rinse stops the light on the front goes back to wash and it starts beeping and won't stop until you either start the wash or shut off the unit

Jul 01, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

I have a Duet tumblefresh 4.0cuft W10284544A. The inlet pump was leaking so I fixed that and now the washer won't co into the spin after the rinse cycle. The washer drains completely after the wash cycle but when the rinse stops the light on the front goes back to wash and it starts beeping and won't stop until you either start the wash or shut off the unit

Jul 01, 2014 | Maytag Atlantis MAV6000 Top Load Washer

See all Maytag Atlantis MAV6000 Top Load Washer Questions

Related Topics

Maytag Atlantis MAV6000 Top Load Washer Logo

482 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

8 Answers
Washer leaking water from bottom

Maytag Atlantis MAV6000 Top...

28 Answers
Maytag Neptune Error COde "nd"

Maytag Neptune MAH9700 Front...

3 Answers
Want to disengage lid lock on maytag centennial

Maytag Centennial 3.2 cu. ft....

12 Answers
How to replace Maytag Washer belt

Maytag SAV5710 Top Load Washer

7 Answers
Model FAV6800AWW will not pump water out if clothes are in machin

Maytag Neptune FAV6800AW Top...

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...