I connected a Polk RM705 system to my Technics SA EX320 reciever. I get no sound out of the rear 2 speakers. I ran the test and get a hiss on all but these 2. I have the tuner set to "surround" and I

SOURCE: Technics SH-AC300 Connection to Power Amp & Pre-Amp

Hi!
The problem is, that your SH-AC300 needs an amp with 5.1 input (but no decoder). For this purpose technics delivered SA-AX710.
So if you'd like to use your current equipment it would be impossible.
The only option is for you to buy 2 more Power Amps (SE-A900S), so that each of 3 amps would take care for one part of music. (one for FL, FR; one for RL, RR; and one for sub and center).
Another option is for you to buy SA-AX710. Then all the problems would be solved with it.

Posted on Feb 24, 2008

SOURCE: Can't get Surround Sound with Movie

hiya

do you get full 5.1 when watching a movie from the dvd player...........??

as when u watch tv the reciever must be set to pro logic to enable 5.1 upmix as its only a stereo feed....

Posted on Feb 23, 2009

SOURCE: Center speaker is dead or what it can be on my Technics SA-dx930.

More than like, the center channel is turned off on your receiver. Please see page 16 of the manual, which is located here:
http://service.us.panasonic.com/OPERMANPDF/SADX930.PDF

The manual says to do this:
Turn on the receiver.
Press Speaker A and B button at the same time.
The word Setting appears then changes to Front
Press A to select Center
Press B to choose Large, Small or None for your center speaker.
After choosing Large or Small, press A again till you see Complete on the screen.

If this helps, please rate my response.

Posted on Apr 20, 2009

SOURCE: Technics SA-DX930 Sound cutting in and out

try rehooking up speaker wires. make sure no bare wire is showing and positive and negative are aligned correctly

Posted on May 19, 2009

SOURCE: Technics sa-g78 no sound from front speakers

Buy yourself a nice Krell amp!!

Posted on Jun 25, 2009