Need new door for GE JTP27 oven

Number one Tip, NEVER use self cleaning cycles. They only exist to break ovens and sell parts.

Try disconnecting the mains after about 10 minutes of cool down time. If that doesn't work, you will need a service call to correctly diagnose if the lock solenoid has failed or you need a new control board.

Why You Should (Almost) Never Use Your Oven's Self ...

https://www.thekitchn.com > why-you-should-almost-n...

Sep 8, 2022 - Self-cleaning, often with temperatures that go over 1000°, is a particular problem. The elements and the oven just get so hot - much, ...

Why You should Never Run A Self Clean Oven Cycle & A ...

https://www.generalappliancesvc.com > why-you-shoul...

Jan 29, 2020 - With an inside temperature exceeding 500° C, and a flash point (the temperature at which items can self-combust without an ignition source) ...

4 Reasons to Stop Using Self-Cleaning Oven Feature ...

https://fixappliances.ca > 4-reasons-stop-using-self-clea...

A self-cleaning oven is a feature on many modern ovens that burns off cooking spills and splatters at an extremely high temperature (932 F° or 500 C°) to ...
‎How Self-Cleaning Ovens Work · ‎Major Parts Damage · ‎Family Safety

Follow the link.

Greetings,
its possible to be the oven sensor or something in the lock circuit...if all else fails then in the electronic oven control which costs 125.00 or there about...might find cheaper price on ebay or internet search The sensor about 40-60 dollars, but without a complete number its hard to be exact with a price or part list...if this is helpful ..please let us know or if I can be of more assistence. let me know...Bruce Denton

If your oven door has gotten bent or warped (maybe you rested something heavy on it...), you need to remove the door, disassemble it, and straighten it. You can lift most oven doors off of their hinges by opening the door several inches to its first "stop," and lifting the entire door straight up. If the hinges have become worn, damaged, or bent, you probably need to replace them. We recommend replacing both hinges at the same time, to prevent uneven wear of the undamaged hinge.

changing them is easy the cost is very high .. you can purchase them from any parts supply / . the problem is if the doors are white so is the control panel / most stainless doors units come with blk control panels . this is a very costley adventure . **** hope this helped ..

Yes, this is a problem with the ERC. You can buy a new one, or we can rebuild it for you.

Best Regards,
Bruce
www.fixyourboard.com

The reason to get F8 is that the component failure that occured within the Electronic Range Control (ERC) effecting temperature processing circuits. Th perfect fix for this problem is to replace Electronic Range Control (ERC).

No watvto know about the fuse without a model #

It would appear you have a faulty thermostat that controls the temp. SUggest you get a new thermostat fitted.

F2 usually means that there was an over temperature condition in the oven cavity. A stalled cooling fan could be a related condition. The usual causes are:
Welded relay contacts. In this case you'll need a new ERC
Cooling fan stalled or blocked air flow to rear of unit.
High resistance inoven sensor leads or connectors.