Instructions cannot work dryer on machine no instructions

Instructions

1Turn off and unplug the dryer. Since you need to remove the front panels and expose the electrical wiring of the dryer's buzzer you should turn the dryer off and then unplug the machine to avoid shocks. Once the dryer has been unplugged, turn its dial to the "on" setting to make sure the dryer is completely powered down.
2Locate the buzzer. The best way to locate the dryer's buzzer is to check the machine's schematic or manual. The buzzer is usually located behind the front panel of the machine. In some cases the buzzer is located behind the dryer's back panel. Dryer buzzers are generally small black boxes that are wired to the timing device.

My washing machine's indicator flashing after 5 minutes,what should i do?

Can't help thinking that either you don't have the revised operating instructions, or the "Sensor Dry System" is not working properly. Download the revised instructions here [http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6231 ] and see if this helps. Otherwise have the sensors in the machine tested.

If you go the the following site, you should be able to find the user instructions for your model wsher dryer.

In the search box enter >>>

SERVICE.CANDY-DOMESTIC.CO.UK/MANUALS.

Then click on>>Laundry
Then click on>>Washer dryers
Enter the model number, and get the instructions.
Please rate my solution.
Thankyou.

I found the instructions!

Ceck the follow instruction just to veryfy what kind of problems your dryer has. You dont have to buy anything just check all the information that is given to you


http://www.youtube.com/watch?v=rQV-z4f7fvA

Your ratting is very important to me
Was this helful?

Load your cloths, set your Dryer Selector Knob, and push the on button. Or so says the manual

Hi.
In you browser box type in Hoover user manual.
Then scroll down to Hoover after sales service instruction manuals.. Click on this, and then on Laundry.then on Waher -dryers, follow instructions
You will find your model listed there,.
Please leave good feedback.
Thanks

It sounds like your igniter is no good. At all costs, check the Fuse before anything else. It is usually accessed from the back of the unit.

they can be found here
http://www.whirlpool.co.uk/app.cnt/whr/en_GB/pageid/pgsrvifuhome001