Philips 50P8341 50" Rear Projection Television Logo

Related Topics:

Question about Philips 50P8341 50" Rear Projection Television

1 Answer

My phillips 5o inch rear projection tv

White targetimage on the on the screen now it seems to be getting bigger

Posted by carl dean on

  • Anonymous May 01, 2008

    sometimes has no picture but when tv is on while it gets a picture

×

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

I'd really like to see what you're describing here, but it sounds as though the SSB (small signal baord) is failing, Philips p/n#Ph3912725871 It's a vertical board on the left side viewed from the rear of the unit. It's clearly one for the shop... Good Luck Bill

Posted on Jun 10, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

I have a Phillips 60PP9202/17F rear projection TV. its getting worn. The overall picture seems to have a slight haze and also seems to have lost the color contrast. yellows and whites are very similar and...

Thats most likely a CRT coolant issue where you will need to remove and replace the coolant in the CRTs ( picture Tunes) Thats a very common problem with Phillips rear projection. You can get the phillips CRT coolant kit from www.tvrepairworld.com which contains the coolant for a 3 CRTs and the CD with instructions.
0helpful
1answer

Red and fuzzy picture can you help on my 50 inch phillips magnavox projection TV

This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
The other common problem is cloudy lens fluid. After many years the coolant in the blue and green lens will become cloudy and cause the screen to look dull, red/orange, bright white, etc. You may even see halos around video.
You can see some example photos and find a solution here on Fixya.
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull
0helpful
1answer

Blue Dots at bottom of screen

i have 6 grey perfect circles on screen of sony 52 inch kdlw3000
0helpful
1answer

Possible spider web inside of reprojection Tv

Hi,
Yyou can clean screen's internal side by takeing off back cover of tv. Belo is picture how to open back cover.

db659cb.jpg
0helpful
1answer

Samsung hcm553w problem

tv image is bigger than the screen size.
0helpful
1answer

I have a phillips 60 inch projection tv double picture

Yes its the convergence ICs. You will need ywo STK392-120 ICs and about six of the 6.8 ohm 1watt metal resistors to repair the issue. You can get replacement ICs and resistors at the following link and they will provide free instalation instructions with pictures so you can easially do the repair yourself and save about 400.00. Here is the link.
http://servicemanuals.vstore.ca/
0helpful
1answer
1helpful
1answer

Phillips/Magnavox 9P5544C102 white raster and shuts down

This denotes a problem called blooming the horizontal lines you see are called retrace lines this is caused by the increase in anode voltage which could be caused by an increase in HV section current which trips the overcurrent protection dircuit and turns the TV off.If you do not have electronics experience I would suggest taking the set to a TV repair shop.
Not finding what you are looking for?

91 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6650 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...