This machine shuts of by itself after like an hour of being working, and then it keeps shutting of every 5 minutes, for us to continue working we have to let it cool down for about 30 minutes.
SOURCE: looking for manual for troy-Bilt super tomahawk wood chipper
here is the link to the manuals for the 47266 http://www.brentchalmers.com/
enjoy :)
SOURCE: Wii keeps shutting down
First, I would advise you to not power up the console if it's getting hot. When the console is running, can you see the small fan on the back spinning? If not, you can probably buy an external cooling fan like this one.
http://www.gamestop.com/product.asp?product%5Fid=802630
This will act as a surrogate cooler to replace the original fan, and should allow the console to stay cool enough to remain on.
SOURCE: My Panasonic TU-PT700U Digital media
Hi, I have a spare TU-PT700U that may be of use for you to solve your problem without having to replace your system. My Panasonic onyx series monitor was stolen out of my house, but they left behind the TU-PT700U and cable. If interested, respond to my craigslist post..
http://sfbay.craigslist.org/sby/ele/930283631.html
SOURCE: Projector overheats after 30 minutes and shuts down
Is the fan in your projector still working in high speed or not spining?
SOURCE: my chipper is throwing long chunks of unchiped
Either your blades are dull or the gap between the intake tray by the blades is too far or is rounded off. Many chippers have a plate on the intake by the blades that can be flipped around when it rounds off. Also some have a edge on the other side of the blade so it can be reversed and give you a fresh edge. Be sure to unplug the sparkplugs and remove the key when going into your chipper to ensure no one can start it when your in it. There is usually a lock bar to keep the blades from moving.
882 views
Usually answered in minutes!
×