Question about Televison & Video

4 Answers

Bush tv standby light keeps flashing but nothing happens just keeps flashing Model: lcd40883f1080p

Posted by keith mould on


4 Answers

Gareth Cartwright

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Mine is touch button to put it having same problem with the standby light on n off.think it is the power board.

Posted on Jul 02, 2016


Grand Canyon Tech

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,866 Answers

These Bush TV 's have a know fault in there power supplies. will help explain the problem more in detail. I am a DIY person the goes wroung picking up old unwanted elders is that people throw away to prove a point that not everything is bad, however not everything is simple. Don't give up and throw it into a landfill just because the problem may be out of your scores e to fix. Should you be handy with a soldering iron and have a local radio shack around you might be able to fix this issue. Bad capacitors are one of the most common faults in power supply units in these flat panels.

Btw, I’m available to help over the phone in case u need at

Posted on Nov 19, 2014


Kelly Mileson

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine is same model and doing the same I don't have receipt and can't fix it

Posted on Nov 15, 2014

Mary Nichols

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Scepter TV that won't come on ?

Posted on Oct 16, 2014

5 Related Answers


  • 125 Answers

SOURCE: bush 37 inch model no idlcd37tv27hd

the tv is going in shutdown mode, is going to be power supply problem. check if your tv is under warranty because you will need a tv tech,

Posted on Dec 12, 2008


Shahid Electronics

  • 10594 Answers

SOURCE: standby lamp keeps on flashing.

Seems its time to replace lamp in your Sony KDF-E50A10
When lamp in TV got weak in result, standby light start blinking and if lamp got broken / dead, you will see lamp light ON.
Lamp replacement procedure is easy and written in user manual, please buy Sony original lamp for TV safety.

Posted on Jul 30, 2009


  • 320 Answers

SOURCE: standby light flashes 3 times

A 3 flash pattern indicates that either the lamp is not seated correctly or that the lamp door is not latched properly. It can also be a fault with the switches that sense whether the lamp is seated or the door is latched. Try reseating the lamp and relatching the lamp door

Posted on Oct 20, 2008


  • 1 Answer

SOURCE: samsung tv LE32R74BD standby light on but wont turn on

samsung tv le32r74bd had tv on standby and wont turn on,it is stuck on standby please can you solve this

Posted on Nov 24, 2008


  • 12 Answers

SOURCE: hi, i have 2 televisions different makes both turn

Hello, check if capacitors are bulged on the secondary side of power transformer

Posted on Jan 15, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i connect my LG soundbar (model number:NB5530A) to my bush smart tv (model:LCD40883F1080P)

The LG NB5530A only has a digital optical audio input. The LCD40883F1080P has a digital (S/PDIF) optical audio output above the RCA audio output jacks on the back connection panel.

Your best audio option is to use this connection. When new, the NB5530A came with a digital audio cable. Remove the protective plastic covers from the cable ends. Plug in the cable using the correct orientation on both sides. If the original optical audio cable is missing or damaged, purchase a replacement and use it. (The audio and power ports on the NB5530A can be covered by a plastic cover. Remove it if necessary and replace it.

If you want to use the analog audio output on the TV, you will need a optical digital to analog audio converter. You still have to provide the digital audio cable between the TV and the converter as well as the RCA cables. See for one example.

See page 8 of the manual for the LCD40883F1080P for the picture of the TV's back panel connections ; it's available at Manuals Lib: . See pages 6 and 10 of the NB5530A manual for the included cables and location of the connections. The manual is available on the product support page: .The direct link to the manual for the NB5530A is currently .

I hope this helps.

Cindy Wells

May 10, 2018 | LG Televison & Video

1 Answer


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Sep 10, 2016 | Bush Televison & Video

1 Answer

The power for my bush tv model number led26982hdt

My bush television wont turn on from standby? - Ask Me Fast > Consumer Electronics > PlayStation > Wont
Hi my bush tele wont turn on it just keeps flashing at me standby light i ve changed the fuse .... Bush 22 inch tv dvd combi keeps restarting remote doesnt work.

22" bush tv wont turn on - The Student Room > ... > Sound and vision

The Student Room
Mar 12, 2012 - 12 posts - ‎7 authors
i got a new tv in january from argos and not had a problem with it until now. The problem is that it just stays on standby and wont turn on. the ...

Easiest TV repair - How to Fix Power [TV turns off, freezes ...

? 6:44
Apr 27, 2014 - Uploaded by Keith Fox
Hello my bush 22 inch tv is messed up Say if i go on it one day it..... it wont turn on from the power botton on the back not from the control ...

Jan 10, 2016 | Bush Televison & Video

1 Answer

Hi I have a Bush 40 inch flat screen tht is 14 months old and a few days ago it started to take around 10 minutes to show the picture but now it won't show at all the standby light comes on and the...

This could possibly be an easy fix. There are a number of troubleshooting steps you can take to isolate where the problem is coming from. Sometimes its a compound problem including fuses, capacitor(s), FET's or simple cold solders on the power supply board. If you are pretty knowledgeable on electronics and testing i can give you some further testing steps. Or you can take the back of the tv and do a visual evaluation for any burns, cap leaks etc. Hope this helps, im here if you need further assistance

Dec 31, 2014 | Televison & Video

1 Answer

My bush lcd won't turn on the white standby light is on but it just flashes and nothing happens when I try to switch it on can anyone help

Its had the circuit board or tube fail. Probably not worth taking to an agent. Get online or local small adds and find another tv.

Nov 15, 2014 | Televison & Video

1 Answer

Bush lcd40883f1080p

What input do you feeds to this TV?

May 01, 2013 | Televison & Video

1 Answer

Bush 40"lcd tv replacement screen

You will have to repost it in the proper category, you are stuck with this one in cars and trucks

Feb 10, 2012 | Cars & Trucks

1 Answer

Bush TV


May 02, 2008 | Bush 2871NTX 28" TV

1 Answer

Bush lcd 27006 standby flashing

Yeah your psu needs new capacitors.

Jan 06, 2008 | Bush 5693D 24" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

6,056 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6164 Answers


Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides