Simply a blocked head.
Make sure you've removed the yellow tear-off strip on the cartridge otherwise ink can't flow into the print head.
Carry out 4 head cleans but cancel the nozzle check pattern by clicking [Finish] after each clean until the 4 cleans are done then allow the nozzle check pattern, it should be now be perfect or at least improved. If not perfect do it again as above.
Any further problems, use our help pages on our website linked from the Epson page and various others: http://www.the-inkstore.co.uk/frame/pages/epson.htm
If you don't know how to clean the heads or prime the heads, again refer to our website on the link above, there'll be step by step guides with pictures to help.
I hope this helps.
Nigel
The INK Store
60 views
Usually answered in minutes!
My problem is the blue cartridge. I have gone through the checklist offered on the printer and changed the ink cartridge. No luck. It still won't print the blue ink.
×