Question about Frigidaire 30" Self-Cleaning Freestanding Gas Range - Easy Care Stainless-Steel
Set self clean and after it finished it was flashing f9. wiped down oven and latch and turned power off and waited 48 hours. it still beeps and flashes but will let me briefly set oven. it then kicks it out and flashes again. you can hold the oven door open and watch the latch engage when it starts to flash.
The "F9" error code means the EOC (electronic oven control) has found the lock motor switches to be out of sequence or shorted.
Test switches and if there is nothing wrong then replace the EOC.
What is the model number?
Posted on Nov 28, 2012
Richard, sounds like you did all the pretests. You'll need a new display panel. When you work on it, be sure to cut the power.
Posted on Dec 13, 2007
I had the situation where the oven thinks the door is locked but it was not locked. Setting and holding clear eventually gave a f9 error.
I solved this by turning the circuit breaker off and taping over the oven light switch ( so it thinks it really is locked ) and turning on the breaker. The oven unlocked and appears fine now.
Posted on Jul 09, 2010
Tips for a great answer:
Oct 29, 2015 | Toaster Ovens
Thank you for your inquiry, Lucie!
From what you have described your Frigidaire oven lock is stuck open and you are receiving error codes "F9" and "DR". The "F9" error code stands for runaway temperature (overheating). This could be an issue with your RTD (Resistance Temperature Detector) or the EOC (Electronic Oven Control). I would recommend performing a reset on your oven and you can do that by disconnecting from your oven for ten minutes. The "DR" code means that the door is not closed or the door latch is not recognizing the door is closed. This could be an issue with your door latch or control panel. If the reset does not help correct your issues I would recommend having a professional technician out to perform a proper diagnosis and repair. Best of luck! -Matt
Apr 30, 2015 | Frigidaire Stove/Oven/Range Black Glass...
Hello Brian Pelletier, thanks for your inquiry!
I understand that you are having issues with your door not locking upon using the self-clean feature. It sounds like a possible issue with your EOC (Electronic Oven Control) or dock latch assembly. I would suggest unplugging your range if possible or flipping you breaker for ten minutes to perform reset. If the light continues to flash you may want to seek assistance from a professional for proper diagnosis and repair. -Matt
Oct 13, 2014 | Frigidaire 30 in. Electric Self-Clean Coil...
Aug 28, 2011 | Maytag MER6772 Gemini Electric Kitchen...
Apr 23, 2010 | Frigidaire 30" Self-Cleaning Freestanding...
Dec 31, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Jun 21, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Mar 27, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Dec 15, 2008 | Frigidaire 30" Self-Cleaning Slide-In...
Oct 24, 2008 | Frigidaire FEF366 Electric Kitchen Range
Mar 22, 2017 | Frigidaire 30" Self-Cleaning Freestanding...
231 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: