Error while attempting to install ScanSnap Manager on Win XP Pro

Hi irene
scansnap s510 drivers (win 7/8) can be found at
driverupdate us . (32/64 bit)
It will take 2 mins from you to install... after updating, go to word and try to print something
I hope I have helped you...
enjoy

Please update to the latest version of the ScanSnap Manager. You can obtain the latest version from the following URL: Click HERE

The same thing happened to me. In a nutshell, you have to install new drivers. Have you recently upgraded your system to SnowLeopard or Lion? I did, and that's what went wrong.

To do:
1. Make sure you have the latest ScanSnap manager: http://www.fujitsu.com/global/support/computing/peripheral/scanners/drivers/mac.html
Install that.
2. Get the Lion update: http://www.fujitsu.com/global/support/computing/peripheral/scanners/drivers/mac-mg22.html
Install that.
3. Open the new ScanSnap Manager (v 2.2). Delete the old one from your dock, so you don't get confused.
4. Scan away.

Hi there,

Try the following step :

Pre-Installation Steps

• Log onto PC with an account that has Administrative Privileges.
• Disconnect ScanSnap scanner, if connected.
• Close any open applications.
• Install ScanSnap Manager, ScanSnap & CardMinder software from the ScanSnap Setup CD-ROM.
  
  • Upon reboot of the installation you may receive an error message stating, “Failed to initialize driver module.” Please disregard and continue.

ScanSnap fi-5110EOX Vista Update Pack Installation Steps

1. Download the fi-5110EOX Update Packs (Vista 32-bit Support)
   
   1. ScanSnap Manager V3.0 – ssv3020up.exe
   2. CardMinder V2.0L10-V2.0L11 – cm2012.exe
2. Install all two update packs that were downloaded in Step #1.
   
   1. Reboot is NOT required after each update pack.
3. Reboot the PC after all three update packs installed completely.
4. Connect ScanSnap Scanner via USB, open lid, let Windows Vista install the new hardware.

As per your instructions i have Uninstall every driver/software that is associated with the printer after computer has been restarted, install the printer driver afresh and connect the printer to the compute it works but after sometime it shown again same error

Reinstall your software or driver then you can remove that error.
Thank You

Check out:

http://forums.macosxhints.com/showthread.php?p=527817#post527817

The Fujitsu ScanSnap V2.2 L11 drivers have been patched by me to work with S300, S500, S510 and fi-5110EOX/2/3 PC-based scanners for the MAC. No need to buy a new scanner. Just apply the patch and then send me a Christmas card! ;)

Hope this helps!

Problem solved. Ignore the "Windows XP approval" message & continue with the fix suggested in the troubleshooting section of the manual.

This is probably due to the program using the same folder for the new version of the program. Best solution would be to uninstall the new version, uninstall the old version and then reinstall the newset version only.
Running a registry cleaner in between does not harm.

One other thing to try is an uninstall program, but I am not sure that will help.

There should not be any problem installing that sofware on that OS and version. My guess is you have a botched (corrupted) install. Try uninstalling if you can otherwise let me know and we'll "clean out the registry." Good luck!