Oven won't heat up

I will say that is the control board that is not working properly. Have you try to unplugged for phew minutes?, this will reset the current settings. If not, I will star replacing the control board. Good Luck!.

f the oven doesn't heat and the on-off light works, test the appliance controls, motor,
and heating element .

major electrical problem. call a repair man asap!

seems like the safety switch not work. be careful

It could be the switch or heating element

I found the answer on other posts on this website and it saved me $500! I had the same problem with my Dacor Model ECD2278 double oven. After I ran the self cleaning the top oven would not come on and the lower oven ran almost double the temp that was set. To fix: disconnect power to the oven at the circuit breaker. Open the oven door. You'll see the grille/grate/steel cover in front of the door latch mechanism, and it should have about 4 screws holding it in place. Remove the screws then remove the grille cover. On my model the tiny red reset button was on the right side on top of a black plastic round piece which is about 1" in diameter. Press the little button down til it clicks.

Try pushing the "convection oven" or "bake" button first, then enter the temperature you want. Then "Start".

Sounds like the control board is not communicating correctly with the rest of the unit, consult a professional.

F5 = EOC electronic control failure replace electronic control is stated in the service manual. If you have any further questions message me them back. Thank you
Rick

If the oven is electric and fan assisted,then I would suggest that the oven fan element is faulty.
Plz rate this solution.
thanks.